Kicker Official Guide to KS600 Coaxial Speakers
Page 2
Kick Panel
Figure 3
Speaker
cut-out
Front Dash
To the
amplifier or source unit
Front Door
Body
Stagger the holes for the wiring and use a rubber or plastic grommet to protect the wire from damage.

2008 KS Coax 4in1 a01.qxp 11/29/2007 3:54 PM Page 2

Models:

KSCoaxialSpeaker

Owner’sManual

KS6930 / KS690 / KS680 / KS650 / KS600 KS5250 / KS4100 / KS460 / KS400 / KS350

Authorized Kicker Dealer: _________________________

Note: The KS 5250 mounting ring attaches over the front of the woofer. All other KS Coaxial models attach as shown in Figure 2.

Door Body

Speaker

cut-out

Figure 2

Door Panel

Reinforcing Ring

Congratulations on your

(Optional)

Mounting

KICKER purchase

Please record your purchase

information and keep your sales receipt for validation of warranty.

Purchase Date:

_________________________

Speaker Model Number:

_________________________

Speaker

cut-out

Ring

Coaxial Speaker

Driver Grille

Screws

Your KS coaxials were specially designed for “Livin’ Loud” out in the harsh automotive environment. They are made of advanced materials and construction techniques to maintain optimal performance for years to come.

Application

The Kicker KS coaxial speakers are specifically designed for mounting in free-air applications. The speakers do not require a sealed enclosure for optimum performance. It is important to isolate the sound coming off the front of the driver from the sound radiating from the back of the driver. This isolation is usually accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated rear chamber. See Figure 1.

Figure 1

Screw mounting ring and coaxial driver into speaker

cut-out and attach speaker grille.

Mounting

If you are replacing factory speakers in their original locations, you may have to enlarge the speaker cut-outs and pre-drill new screw holes using a 7/64” (2.5mm) bit. Custom mounting locations will require more preparation and work. In either case, make sure the speaker will not interfere with the trunk and door opening and closing mechanisms, and the enclosed screws will not puncture the fuel tank, wiring, or interfere with any other mechanical parts on the underside of the mounting surface. Cycle the windows all the way down and up.

If the speaker cut-out locations require you to cut metal, avoid structural metal and braces.

INSTALLATION

INSTALLATION

Trunk / Storage Space

Front Sound

Waves

Rear Sound

If the door body and panel cannot support the weight of the speaker, an optional reinforcing ring (thin piece of wood or Medium Density Fiberboard) may be fastened or adhered to the door body. Mount the speaker to the vehicle as outlined in Figure 2.

If factory speaker wiring is not available in your desired location, it may be necessary to run speaker wire through the door jamb. The speaker wire should be kept away from sharp edges and avoid the possibility of getting pinched by the door. An existing grommet in the door jamb is the ideal place to run the

Waves

Rear Seat

Location

The sound produced by the KS coaxials is directional. Find the best location for stereophonic sound. If necessary, add more KS coaxial speakers to the system to help distribute and balance the sound. After determining the best mounting locations, carefully check the areas where the mounting hardware will be placed. See Figure 2.

Please allow two weeks of break-in time for the speaker to reach optimum performance.

speaker wire. If the factory hole and grommet do not exist or are inaccessible, you must drill a hole to run the speaker wire through the door jam. Be careful not to drill into other wiring or door mechanisms. Any time a wire is run through a hole, it is necessary to insert a rubber or plastic grommet to protect the wire from damage as outlined in Figure 3.

If the supplied hardware is not applicable to your installation, some other means of securely attaching the speakers to the vehicle must be used.

2

KSCOAXIALSPEAKER

3

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Kscoaxialspeaker Mounting KSCoaxialSpeakerApplication LocationPerformance Wiring to a single channelWiring two KS-Series Coax Speakers to a single channel Aplicación ErformancePAltavoz coaxial KS Manual del propietario UbicaciónCableado a un solo canal MontajeEspecificaciones comunes a todos los modelos RendimientoModelo KS350 KS400 KS460 KS4100 KS5250 De subwoofer Comp y CompVR de KickerAnwendung KS Coaxial SpeakerBenutzerhandbuch EinbauLeistung Anschluss an einen KanalZwei KS-Koaxiallautsprecher an einen Kanal anschließen 150x230 16152x217 EmplacementDreiweg 6x9 100 300 30-21k 6x8 9/16152x217 15,9 Modèles Félicitations pour votre achatRaccordement à un seul canal MontageCaractéristiques communes à tous les modèles PerformancesModèle KS350 KS400 KS460 KS4100 KS5250 Modèle KS600 KS650 KS680 KS690 KS6930AcousticsLimitedWarranty InternationalWarranty

KS460, KS4100, KS690, KS600, KS350 specifications

Kicker has long been a name synonymous with high-quality audio equipment, and their KS series of speakers exemplifies this commitment to excellence. The KS650, KS680, KS5250, KS400, and KS350 are five standout models in the lineup, each offering unique features, advanced technologies, and superior sound characteristics.

The Kicker KS650 is a 6.5-inch coaxial speaker that boasts impressive power handling capabilities and a peak power output of 180 watts. It features a polypropylene woofer cone that ensures deep and accurate bass responses. The KS650 is equipped with a high-quality silk dome tweeter for crystalline highs, providing an immersive audio experience. The speaker uses a vented basket design for efficient cooling, contributing to enhanced durability and performance.

Moving to the KS680, this 6x8-inch speaker is designed for those seeking robust sound in a compact form factor. It incorporates a durable polypropylene cone, combined with a ¾-inch balanced dome tweeter. The KS680 excels in delivering a well-rounded audio experience, from thumping bass to crisp treble, thanks to its high-efficiency design. With a peak power of 240 watts, it handles dynamic music genres effortlessly.

The KS5250 takes a different approach, combining a 5.25-inch woofer with a separate 1-inch tweeter, that delivers a true component speaker experience. This model is characterized by its excellent sound staging and separation, allowing for an immersive listening experience. It maintains an impressive power handling of 150 watts peak, making it a robust choice for enthusiasts who appreciate clarity across their sound spectrum.

The KS400 is a compact 4-inch speaker that is perfect for installations in tight spaces without sacrificing audio quality. This model features a polypropylene woofer and a treated cloth surround, which ensures longevity and reliable performance. With a peak power handling of 100 watts, it delivers a surprisingly full sound for its size, making it an excellent choice for smaller vehicles or for use in rear speaker applications.

Lastly, the KS350, a 3.5-inch speaker, is designed for those who need a solution for very limited spaces but still desire rich sound. Equipped with a powerful neodymium magnet and a high-efficiency design, it provides clear audio at lower volume levels, making it ideal for background music or rear deck applications.

All models in the Kicker KS lineup utilize advanced materials and technologies to enhance sound quality and longevity. These speakers are built for performance and clarity, delivering an outstanding audio experience whether you’re commuting or enjoying a road trip. With Kicker, quality sound is always within reach.
Top Page Image Contents