Bryant A96447 manual Using Your Smart Sensors, Changing the desired temperature

Page 21

Using Your Smart Sensors

If you purchased optional smart or interactive sensors with your Zone Perfect Plus system, you have the ability to control the tem- perature of a zone at that zone’s location. Suppose you have a guest bedroom, and it’s used infrequently. With a smart sensor in the zone, a guest can adjust the temperature as needed for their comfort without changing the program at the user interface.

Changing the desired temperature:

1.The current temperature in that zone will be displayed in the LCD.

2.Press the UP or DOWN button to display the desired temperature for that zone. The LCD will display the current mode of operation, either heat or cool.

3.Press the UP or DOWN button again as needed until the new desired temperature is shown.

4.Press SET TEMP button to change temperature between COOL desired temperature and HEAT desired temperature.

5.Pressing HOLD button will hold the desired temperature setting indefinitely. Pressing HOLD button again removes the hold function.

A97187

A97188

6.Pressing OUT button will program the zone as being unoccupied. Pressing OUT button again changes the zone to occupied. When a zone is set to OUT, desired temperature will be displayed as dashes when the UP and DOWN buttons are pressed.

A97190

OUT

OUT

COOL

DESIRED TEMP

Viewing the outdoor temperature and indoor humidity:

1.Pressing both UP and DOWN buttons simultaneously will display the outdoor temperature, if this feature is included, and the indoor humidity. Outdoor temperature will be displayed first for 5 sec, followed by humidity for 5 sec. Smart Sensor will then return to normal. The humidity value will be the humidity level as measured at the user interface.

Note: If the All Zone feature has been enabled from the user interface, you will not be able to override the settings at the smart sensor location. The desired temperature will be dis- played as dashes when the UP and DOWN buttons are pressed. You must first remove the All Zone function by pressing the ALL ZONE button on the user interface.

A Smart Sensor does not remove or transfer features from User Interface. It only provides a location within zone where access is provided to some of User Interface features. Any input that can be provided at Smart Sensor can also be provided at User Interface.

A97242

A97192

Smart Sensor display

with ALL ZONE enabled

A97647

—21—

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Zone Perfect Plus Introduction Quick Start Table of ContentsZone # Planning Your Comfort ScheduleComfort Chart A96441 Step Programming Your Comfort SchedulePress the Next Day button until Monday Mo is displayed A96451 If that zone is going to be unoccupied press the Out button Hint Using Your System Setting the current daySetting the current time Selecting the fan mode Selecting the system modeClean filter feature Viewing the temperatures in each zoneDisplaying the outdoor air temperature Turning a zone off Overriding the Program SettingsViewing the indoor humidity Controlling Your HumidityA96466 Programming your system for the Cool to Dehumidify function Programming your system to dehumidify while on vacation Using Your Smart Sensors Changing the desired temperatureViewing the outdoor temperature and indoor humidity What if I go on vacation? Frequently Asked QuestionsComfort Chart

A96447 specifications

The Bryant A96447 is a state-of-the-art multi-speed air conditioning system designed for residential use. This innovative unit is an ideal solution for homeowners seeking efficient climate control combined with advanced technology. The A96447 model boasts a variety of features that cater to modern energy efficiency standards, significantly reducing energy costs while providing optimal indoor comfort.

One of the standout characteristics of the Bryant A96447 is its advanced multi-speed compressor. This allows the unit to operate at varying speeds, adapting to the specific cooling needs of the space. By running at lower speeds during milder weather, the A96447 can maintain a consistent temperature without the unnecessary energy expenditure associated with traditional single-speed systems. The result is quieter operation and enhanced energy savings, making it a smart choice for eco-conscious households.

In addition to its compressor technology, the Bryant A96447 incorporates an advanced control system. This system enables precise temperature management, allowing users to easily program settings via a user-friendly digital thermostat. With features such as Smart Thottling technology, the system can intelligently adjust airflow and temperature based on both outdoor conditions and indoor occupancy, ensuring comfort while optimizing energy use.

The unit also comes with enhanced filtration capabilities. Equipped with a high-efficiency air filter, it effectively traps airborne particles, allergens, and pollutants. This ensures cleaner air in the home, contributing to a healthier indoor environment. The A96447’s ability to provide superior filtration is particularly beneficial for households with allergy sufferers or those who value high-quality air.

Moreover, the Bryant A96447 is designed with durability in mind. Its robust construction features a high-density core and resilient materials that increase its longevity while minimizing maintenance needs. With proper installation and care, the unit can deliver reliable performance for years, giving homeowners confidence in their investment.

Overall, the Bryant A96447 is a compelling choice for those seeking a highly efficient, technologically advanced air conditioning system. Its multi-speed capabilities, smart control options, superior filtration, and durable construction position it as a leader in residential HVAC solutions. Homeowners can enjoy reliable comfort while taking advantage of significant energy savings, making the A96447 a wise addition to any home.
Top Page Image Contents