White Rodgers HC-TST501CMMS manual System Fault Codes, Diagnostic Description

Page 2

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL AND SYSTEM COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE.

Introduction to Thermostat and Communicating System

The system consists of a premium indoor furnace or air handler, an outdoor AC condensing unit or heat pump and touchscreen thermostat that is the HVAC command center. All these devices are linked together and communicate using ClimateTalk language protocol. The benefits of ClimateTalk are auto-configuration of the system, the ability to share information throughout the system for enhanced diagnostics and control, and straightforward wiring since communications requires attaching only four wires. This ensures simple, reliable operation and an accurate installation.

WARNING

Thermostat installation and all components of the control system shall conform to Class II circuits per the NEC code.

WARNING

To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.

ATTENTION: MERCURY NOTICE

This product does not contain mercury. However, this product may replace a product that contains mercury.

Mercury and products containing mercury must not be discarded in household trash. Do not touch any spilled mercury. Wearing non-absorbent gloves clean up any spilled mercury and place in a sealed container. For proper disposal of a product containing mercury or a sealed container of spilled mercury, place it in a suitable shipping container.

Refer to www.white-rodgers.comfor location to send the product containing mercury.

 

 

 

 

 

 

 

System Fault Codes (Cont.)

 

Display code

 

Diagnostic Description

 

 

81

 

Return air sensor out of range

 

 

82

 

Supply air sensor out of range

 

 

83

 

Coil Temperature Sensor Fault

 

 

84

 

Outdoor Ambient Temperature Sensor Fault

 

 

 

 

 

 

 

93

 

Board Failure

 

 

P

 

Compressor Protector Fault

 

 

 

 

 

 

 

d1

 

No Shared Data

 

 

d3

 

Insufficient Indoor CFM

 

 

 

 

 

 

 

d4

 

Memory Card Invalid

 

 

d5

 

Card Hardware Conflict

 

 

 

 

 

 

 

d6

 

Blower Horsepower Conflict

 

 

d7

 

Blower Manufacturer Conflict

 

 

 

 

 

 

 

d8

 

Old Shared Data

 

Please refer to equipment instructions for additional fault information.

Image 2
Contents HC-TST501CMMS System Fault Codes Diagnostic DescriptionTable of Contents Air Conditioner User Menus Battery LocationWiring Requirements Status Quick Install StepsInstalling thermostat Week History 2 WK HistCommunications Systems Power UpMessages at Thermostat Heat Pump User MenusPress Run Schedule Check System OperationFan Operation Heating System Press Run ScheduleSet Current Time and Day Dipswitch Choose the System Setting Cool, Off, Heat, Em, AutoSetup Air Handler User MenusSet Up Thermostat Options Select On Demand DehumidificationSelect continuous FAN speed Select Energy Management RecoveryFurnace User Menus Select program days per weekSelect temperature offset. Scrolling Select continuous backlight. ScrollingSelect temperature display as Select air filter maintenanceSelect UV lamp maintenance Select humidifier pad maintenanceAir Handler Lockout Temperature Heat Pump DisableDual Fuel Disable System OperationNon-Programmable Mode Programmable ModePermanent Temperature Hold Temporary Program OverrideEquipment User Menus Auto ModeChoose the FAN Setting Auto or On. FAN Auto is the most Check System StatusMaintenance Reminder Message Fault Status

HC-TST501CMMS specifications

The White Rodgers HC-TST501CMMS is a versatile and technologically advanced thermostat designed to enhance home heating and cooling systems. This model stands out for its user-friendliness, accuracy, and energy-saving capabilities. With its sleek design and intuitive interface, it brings modern convenience to climate control.

One of the main features of the HC-TST501CMMS is its multi-stage heating and cooling capabilities. It can manage up to two stages of heating and two stages of cooling, which makes it suitable for various types of HVAC systems, including gas, electric, and heat pump systems. This flexibility ensures optimal comfort throughout the year while maintaining efficiency.

Equipped with advanced touch-screen technology, the thermostat offers a crystal-clear display that simplifies operation. Users can easily navigate through the settings with a few simple touches. The backlit screen ensures visibility even in low light conditions, allowing homeowners to adjust settings anytime they need.

Another significant feature of the HC-TST501CMMS is its programmable capabilities. With a 7-day programmable schedule, users can customize their heating and cooling based on their daily routines. This function not only enhances comfort but also contributes to energy savings by reducing energy usage when the home is unoccupied. The thermostat also offers a permanent hold option, allowing users to maintain a specific temperature without following the programmed schedule if desired.

In terms of connectivity, the HC-TST501CMMS is designed for compatibility with Wi-Fi networks, allowing users to control their home climate remotely via a smartphone app. This remote access feature means homeowners can make adjustments on the go, ensuring comfort is maintained even when they are not home.

Energy-saving features are an integral part of this thermostat. It includes a built-in energy usage monitoring system that helps users track their consumption. This feature can assist in identifying trends and making informed choices about energy use, ultimately leading to lower utility bills.

Overall, the White Rodgers HC-TST501CMMS combines modern technology with user-centric design, making it an excellent choice for those looking to improve their home’s climate control systems. Its advanced features, ease of use, and energy-saving potential make it a reliable addition to any household.