Heat & Glo LifeStyle EVEREST manual Safety and Warning Information

Page 2

SAFETY AND WARNING INFORMATION

READ and UNDERSTAND all instructions carefully

!before starting the installation. FAILURE TO FOLLOW these installation instructions may result in a possible fire hazard and will void the warranty.

!Prior to the first firing of the fireplace, READ the Using Your Fireplace section of the Owners Guide.

DO NOT USE this appliance if any part has been

!under water. Immediately CALL a qualified service technician to inspect the unit and to replace any part of the control system and any gas control which has been under water.

!THIS UNIT IS NOT FOR USE WITH SOLID FUEL. Installation and repair should be PERFORMED by a

!qualified service person. The appliance and venting system should be INSPECTED before initial use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is IMPERATIVE that the unit’s control compartment, burners, and circulating air passageways BE KEPT CLEAN to provide for adequate combustion and ventilation air.

Always KEEP the appliance clear and free from

!combustible materials, gasoline, and other flammable vapors and liquids.

!NEVER OBSTRUCT the flow of combustion and ventilation air. Keep the front of the appliance CLEAR of all obstacles and materials for servicing and proper operations.

Due to the high temperature, the appliance should

!be LOCATED out of traffic areas and away from furniture and draperies. Clothing or flammable material SHOULD NOT BE PLACED on or near the appliance.

!Children and adults should be ALERTED to the hazards of high surface temperature and should STAY AWAY to avoid burns or clothing ignition. Young children should be CAREFULLY SUPERVISED when they are in the same room as the appliance.

These units MUST use one of the vent systems

!described in the Installing the Fireplace section of the Installers Guide. NO OTHER vent systems or components MAY BE USED.

This gas fireplace and vent assembly MUST be

!vented directly to the outside and MUST NEVER be attached to a chimney serving a separate solid fuel burning appliance. Each gas appliance MUST USE a separate vent system. Common vent systems are

PROHIBITED.

INSPECT the external vent cap on a regular basis to

!make sure that no debris is interfering with the air flow.

!The glass door assembly MUST be in place and sealed, and the trim door assembly MUST be in place on the fireplace before the unit can be placed into safe operation.

WARNING: DO NOT OPERATE this appliance with

!the glass door removed, cracked, or broken. Broken glass may be sharp to the touch, use caution when removing. Replacement of the glass door should be performed by a licensed or qualified service person. DO NOT strike or slam the glass door.

!The glass door assembly SHALL ONLY be replaced as a complete unit, as supplied by the gas fireplace manufacturer. NO SUBSTITUTE material may be used.

!DO NOT USE abrasive cleaners on the glass door assembly. DO NOT ATTEMPT to clean the glass door when it is hot.

Turn off the gas before servicing this appliance. It is

!recommended that a qualified service technician perform an appliance check-up at the beginning of each heating season.

!Any safety screen or guard removed for servicing must be replaced before operating this appliance.

!DO NOT place furniture or any other combustible household objects within 36 inches of the fireplace front.

Heat & Glo • Everest • 750-900 Rev. L • 1/06

2

Image 2
Contents Installers Guide What to do if you smell gasSafety and Warning Information Table of Contents Everest Service Parts List Everest1Approvals and Codes Installation CodesHigh Altitude Installations Appliance Certification2Getting Started Pre-install PreparationWarranty Introducing the Heat & Glo Gas FireplacesDiagram of the Everest Clearance Requirements 3Installing the FireplaceLocating the Fireplace Framing the FireplaceING Systems or Components MAY be Used Installing the Vent System A. Vent System ApprovalsIdentifying Vent Components Straight Up Vertical Venting Vertical VentingMAX .4 M Venting with ONE 1 90 Elbow Venting with One 90 ElbowVenting with TWO 2 90 Elbows Venting with Two 90 ElbowsVenting with three 90 elbows Venting with Three 3 90 Elbows+ V + H Installing Vent Components Assembling Vent SectionsCorrect Incorrect To Install the Heat ShieldInstall Support Brackets 12 Hole and Vent Pipe Ceiling Firestop Ceiling SideVent Termination Trapezoid Termination CapService Alcove ApplicationsFor Vertical Terminations To locate the vent Vertical Wall and 2-FEET below a HORI- Zontal OverhangGas Control Systems Intermittent Pilot Ignition IPI System Vice Must be Wired to the Fireplace Junction BOXPositioning, Leveling, and Securing the Fireplace To Check for GAS Leaks Gas Supply LineGas Pressure Requirements Wiring the Fireplace Wall SwitchSealant Material Hearth Extensions FinishingLET/OUTLET Grilles in ANY Manner Placing the Rock Installing Trim, Logs Ember Material Installing the TrimPositioning the Logs Placing the Ember MaterialDouble-check for faulty components After the InstallationBattery Backup Before Lighting the FireplaceFireplace Maintenance 4Maintaining and Servicing Your Fireplace

EVEREST specifications

The Heat & Glo LifeStyle EVEREST fireplace is a remarkable addition to any home, offering a perfect blend of aesthetic appeal and cutting-edge technology. Designed for those who appreciate both style and functionality, the EVEREST is engineered to elevate the ambiance of any space while providing the warmth and comfort that a traditional fireplace offers.

One of the standout features of the LifeStyle EVEREST is its stunning design. Boasting a wide viewing area and a sleek, modern exterior, it is available in various styles and finishes that can seamlessly integrate into different interior decors. Whether you prefer a minimalist look or something more contemporary, the EVEREST is versatile enough to match various preferences. The large glass front allows for maximum visibility of the flames, transforming any room into a cozy haven.

In terms of technology, the EVEREST incorporates advanced heating capabilities that ensure efficient warmth distribution throughout your living space. The patented heat management system allows for optimal performance, converting a significant amount of fuel into heat while minimizing emissions. This not only ensures a more eco-friendly operation but also translates into lower energy costs for the homeowner.

The EVEREST is equipped with innovative features such as remote control functionality, making it remarkably user-friendly. With just a press of a button, you can adjust the flame height and control the heat output, giving you complete control over your fireplace experience. Additionally, the fireplace offers customizable flame options, allowing you to choose between different colors and intensities to create the perfect atmosphere for any occasion.

Safety is also a priority with the Heat & Glo LifeStyle EVEREST. The fireplace has been designed with an array of safety features, including glass doors that remain cool to the touch, ensuring peace of mind for families with children or pets. The integrated safety shut-off system further adds to its reliability, providing homeowners with confidence in their heating solution.

In conclusion, the Heat & Glo LifeStyle EVEREST is more than just a fireplace; it is an investment in style, comfort, and advanced technology. With its modern design, efficient heating capabilities, user-friendly features, and safety mechanisms, the EVEREST is an ideal choice for anyone looking to enhance their living space while enjoying the warmth and charm of a stunning fireplace.