Heat & Glo LifeStyle st-42tvfl manual Step Gas Pressure Requirements, Pressure Natural Gas Propane

Page 23

•At the gas line access hole, use insulation to re- pack the space around the gas pipe.

•Insert insulation from the outside of the fireplace and pack the insulation tightly to totally seal between the pipe and the outer casing.

The gas line should be installed by a qualified service technician.

GAS LINE ACCESS

USE A WRENCH ON

SHUT-OFF VALVE

WHEN TIGHTENING

GAS LINE

MANUAL

SHUT-OFF

VALVE

GAS VALVE

FLEX CONNECTOR

Step 8

Gas Pressure

Requirements

Figure 10. Gas Supply Line

Pressure requirements for Heat-N-Glo gas fireplaces are shown in the table below.

Pressure

Natural Gas

Propane

 

 

 

Minimum

5.0 inches

11.0 inches

Inlet Pressure

w.c.

w.c.

 

 

 

Maximum Inlet

14.0 inches

14.0 inches

Gas Pressure

w.c.

w.c.

 

 

 

Manifold

3.5 inches

10.0 inches

Pressure

w.c.

w.c.

A one-eighth (1/8) inch (3 mm) N.P.T. plugged tapping is provided on the inlet and outlet side of the gas control for a test gauge connection to measure the manifold pressure.

The fireplace and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of the system at test pressures in excess of one-half (1/2) psig (3.5 kPa).

The fireplace must be isolated from the gas supply piping system by closing its individual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than one-half (1/2) psig (3.5 kPa).

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Installers Guide Safety and Warning Information Getting Started Table of ContentsInstalling the Fireplace Approvals and CodesService Parts PIER-TVFL and PIER-TVFL-DSI NG, LP Service Parts List / Liste des pièces de rechangeST-42TVFL, ST-42TVFL-DSI ST-42TVFL and ST-42TVFL-DSI Standing Pilot Ignition Service Parts PIER-TVFL, ST-42TVFLDirect Spark Ignition Service Parts PIER-TVFL-DSI, ST-42TVFL-DSICodes Installation CodesHigh Altitude Installations Approvals and CodesGetting Started Diagram of the Pier-TVFL Diagram of the ST-42TVFL Ceiling Installing the Fireplace Step LocatingClearance Requirements Step Framing Fireplace Framing DimensionsStep Negative Pressure Make-up Air Make-up Air Air DamperMaximum NO. of Elbows 2 90o or 4 45o Step Installing Vent SystemVent System Approvals System ComponentsVent System Attachment Vent Termination Bedroom Installation in CanadaDirect Spark Ignition DSI System Step Positioning Leveling, Securing FireplaceStep Gas Control Systems Standing Pilot Ignition SystemStep Gas Supply Line Pressure Natural Gas Propane Step Gas Pressure RequirementsWall Switch Step Wiring FireplaceFor Standing Pilot Ignition Wiring Optional AccessoriesDirect Spark Ignition DSI Wiring Diagram For Direct Spark Ignition DSI WiringStep Finishing Positioning the Logs Step Installing Trim Logs, and Ember MaterialInstalling the Trim Hearth ExtensionsPlacing the Ember Material Placement of the Ember MaterialDouble-check for gas leaks Step Before Lighting Fireplace After InstallationDouble-check for faulty components Maintaining and Servicing Your Fireplace Fireplace MaintenanceBurner Flame Patterns

st-42tvfl specifications

The Heat & Glo LifeStyle ST-42TVFL is a premier gas fireplace that seamlessly combines modern design with advanced technology, providing an optimal heating experience for homes. With its clean lines and stylish aesthetics, this fireplace not only serves as a functional source of warmth but also enhances the ambiance of any living space.

One of the standout features of the ST-42TVFL is its impressive viewing area. The large, front-facing glass provides an unobstructed view of the dancing flames, creating a focal point in the room that captivates and engages. The fireplace is equipped with a sleek, contemporary design, featuring a linear burner that produces a beautiful flame pattern, enhancing the visual appeal.

In terms of technology, the LifeStyle ST-42TVFL incorporates advanced Heat & Glo innovation with the IntelliFire touch ignition system, which allows for easy and reliable operation. This system ensures that the fireplace ignites efficiently with the simple push of a button, eliminating the need for matches or lighters. For added convenience, the fireplace can also be operated with a remote control, allowing users to adjust the flame height and turn the unit on or off from anywhere in the room.

The ST-42TVFL is designed with energy efficiency in mind. It boasts a direct venting system that draws air from the outside for combustion, ensuring that indoor air quality is maintained. This feature also maximizes heating efficiency, providing warmth without sacrificing comfort or safety. The fireplace has an impressive thermal efficiency rating, making it an eco-friendly choice for homeowners looking to reduce their carbon footprint while enjoying a cozy atmosphere.

Another noteworthy characteristic of the Heat & Glo LifeStyle ST-42TVFL is its customizable options. Users can select from a variety of interior finishes, media options, and decorative surrounds, allowing for personalized integration with any home decor. Whether a sleek modern design or a more traditional aesthetic is desired, this fireplace can be tailored to fit individual tastes.

In summary, the Heat & Glo LifeStyle ST-42TVFL gas fireplace is a sophisticated heating solution that offers a combination of style, efficiency, and advanced technology. Its expansive viewing area, intelligent ignition system, and customizable design make it a popular choice for homeowners seeking both form and function in their living spaces. With its focus on energy efficiency and user-friendly features, the ST-42TVFL stands out as an exceptional choice for enhancing any home.
Top Page Image Contents