Congratulations on your KICKER purchase
Please record your purchase
information and keep your sales receipt for validation of warranty.
| DigitalStereoSystem |
| forZuneTM |
| Owner’sManual |
Model: | ZK500 |
Authorized Kicker Dealer: | _________________________ |
Purchase Date: | _________________________ |
Model Number: | ZK500 |
Serial Number: | _________________________ |
Figure 2 |
| LCD |
|
| ||||
Display |
| 5” (127mm) | ||||||
Rotary |
|
|
|
|
| |||
Control |
|
|
|
|
| Drivers | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vibration
Isolation
Pad
Docking
Bay
3/4” (20mm)
Silk Dome
Tweeters
The Kicker zKICK ZK500 Stereo System for Zune is designed for livin’ loud with your Zune device in
the home environment. The ZK500 is fully featured with dual
DockingYourZuneDevice | Figure 1 |
| |
The Zune Device should be mounted on the docking bay before |
|
connecting any power cables to the Kicker Stereo System. |
|
1. Choose the dock adapter that best fits your Zune |
|
device. See the table below. |
|
2. Attach the adapter to the ZK500’s docking bay. |
|
3. Connect your Zune device to the ZK500’s dock |
|
connector. |
|
4. Plug the power cable into the DC input on the |
|
back of the ZK500. |
|
5. Plug the |
|
| Skid | IR Remote |
| Transport | |
Figure 3 | Receiver | |
Handle |
|
Square
Passive
Radiator
INSTALLATION
INSTALLATION | protected electrical outlet. |
| |
ZK500DockAdapter | ZuneDeviceModel | ||
|
| ||
1. A | Zune 30 Gb Digital Media Player | ||
|
| ||
2. B | Zune 80 Gb Digital Media Player | ||
| |||
|
|
| |
| 3. C | Zune 4, 8 Gb Digital Media Player |
Note: The ZK500 is compatible with Zune Firmware Version 1.4 and beyond. Before docking your Zune device to the ZK500 Stereo
System, update to the latest Zune firmware by syncing your Zune device to your Zune software and checking for the most recent updates.
Visit www.soundgate.com to learn more about Soundgate products designed for enjoying your Zune device in the mobile environment. Soundgate products offer a wide range of options for connecting your Zune device to your factory car stereo system.
Note: To prevent vibration during playback, use the enclosed vibration isotation pad as shown in Fig. 2.
2 | ZK500STEREOSYSTEM |
Composite | L | R | DC Power | 1/8” Stereo |
Video Out | Stereo RCA | 22 Volts | Auxiliary Input | |
|
| Output |
|
|
ImportantSafetyInstructions
Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent damage to your self, your Kicker product, or your portable entertainment device.
The ZK500 should not be used near water or in an environment where exposure to liquids is possible. This includes but |
|
is not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid containers should |
|
not be placed on or near the ZK500 Stereo System. The ZK500 Stereo System should not be cleaned with liquid |
|
cleaners. Use only a dry cloth to clean the ZK500. Only use the ZK500 in areas with adequate open ventilation allowing |
|
at least 4” of space on all sides of the ZK500. Do not set the ZK500 on any surface or cover the ZK500 with any object |
|
that could impede the airflow to and from the ZK500 Stereo System. The ZK500 should not be placed near any source |
|
of heat. This includes but is not limited to stoves, radiators, heating elements, electronic heat sources, and areas where |
|
excessive solar heat can be generated. Do not install the ZK500 near any flame or place any flammable objects near the |
|
device. The power outlet used to provide power to the ZK500 should be accessible at all times. The polarized |
|
electrical plug has a wide blade and narrow blade that should fit into the corresponding wide and narrow receiving |
|
connections of your electrical outlet. Do not force the plug into the outlet. If the plug provided with the unit does not fit, |
|
consult with an electrician to upgrade the electrical outlet accordingly. The power cord should be situated in a way that |
|
protects it from being pinched, walked on, tripped over, or accidentally pulled from the electrical outlet or the electrical |
|
input on the ZK500. Do not run the cable through doorways or underneath objects that could damage the wire or tear |
|
the insulating material surrounding the wire. Only use the manufacturer supplied power supply with the ZK500. We |
|
recommend using a surge protector/power conditioner and unplugging the ZK500 during any electrical storms or |
|
situations that could cause voltage fluctuations in the electrical system. | 3 |
|