Trouble- shooting

With proper installation, operation, and maintenance your gas fireplace will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qualified service person in the diagnosis of a problem and the corrective action to be taken. This troubleshooting guide can only be used by a qualified service technician.

Standing Pilot Troubleshooting

	Symptom	Possible Cause	Corrective Action
1. After repeated		a. Defective ignitor	Check the spark at the electrode and
	triggering of the red		pilot. If no spark and electrode wire is
	or black piezo		properly connected, replace the ignitor.
	button, the spark	b. Defective pilot or	Using a match, light the pilot. If the
	ignitor will not light		Using a match, light the pilot. If the
	ignitor will not light		pilot lights, turn off the pilot and
	the pilot.	misaligned	pilot lights, turn off the pilot and
	the pilot.	misaligned	trigger the red or black piezo button
		electrode (spark at	trigger the red or black piezo button
		electrode (spark at	again. If the pilot lights, an improper
		electrode)	again. If the pilot lights, an improper
		electrode)	gas/air mixture caused the bad
			gas/air mixture caused the bad
			lighting and a longer purge period is
			recommended. If the pilot will not
			light, ensure that the gap at the
			electrode and pilot is 0.3 cm to have
			a strong spark. If the gap is OK,
			replace the pilot.
		c. No gas or low gas	Check the remote shut-off valves
		c. No gas or low gas	from the fireplace. Usually, there is a
		pressure	from the fireplace. Usually, there is a
		pressure	valve near the gas main. There can
			valve near the gas main. There can
			be more than one (1) valve between
			the fireplace and the main.
		d. No LP in the tank	Check the LP (propane) tank. You
		d. No LP in the tank	may be out of fuel.
			may be out of fuel.
2.	The pilot will not stay	a. Defective	Check that the pilot flame impinges
	lit after carefully	thermocouple	on the thermocouple. Clean and/or
	following the lighting		adjust the pilot for maximum flame
	instructions.		impingement.
			Ensure that the thermocouple
			connection at the gas valve is fully
			inserted and tight (hand tighten plus
			1/4 turn).
			Disconnect the thermocouple from
			the valve, place one millivolt meter
			lead wire on the tip of the
			thermocouple and the other meter
			lead wire on the thermocouple
			copper lead. Start the pilot and hold
			the valve knob in. If the millivolt
			reading is less than 15mV, replace
			the thermocouple.
		b. Defective valve	If thermocouple is producing more
			than 15 millivolts, replace faulty valve.
3.	The pilot is burning,	a. ON/OFF switch or	Check the ON/OFF switch and wires
3.	The pilot is burning,	wires defective	for proper connections. Place the
	there is no gas		jumper wires across the terminals
	burner, the valve		at the switch. If the burner comes on,
	knob is in the ON		replace the defective switch. If the
	position, and the		switch is OK, place the jumper wires
	ON/OFF switch is in		across the switch wires at the gas
	the ON position.		valve. If the burner comes on, the
			wires are faulty or connections are
			bad.
		b. Thermopile may	If the pilot flame is not close enough
		b. Thermopile may	physically to the thermopile, adjust
		not be generating	physically to the thermopile, adjust
		not be generating	the pilot flame.
		sufficient	the pilot flame.
		sufficient
		millivoltage	Be sure the wire connections from
			the thermopile at the gas valve
			terminals are tight and that the
			thermopile is fully inserted into the
			pilot bracket.

6000TRS-CD specifications

The Heat & Glo LifeStyle 6000TRS-CD is an innovative gas fireplace designed to enhance both the ambiance and functionality of any living space. Known for its sleek design and cutting-edge technology, the LifeStyle 6000TRS-CD offers a perfect blend of style and warmth. This fireplace is particularly suitable for modern homes, providing a modern aesthetic while ensuring maximum comfort.

One of the standout features of the LifeStyle 6000TRS-CD is its impressive heat output. With a heating capacity of up to 30,000 BTUs, it is capable of efficiently warming large areas, making it an ideal solution for both chilly winter nights and evenings spent with family and friends. The fireplace operates with natural gas or propane, offering flexibility to suit your home's fuel options.

The design of the 6000TRS-CD is particularly noteworthy. It boasts a stunning contemporary look, with clean lines and a large viewing area that allows for an unhindered view of the flames. The fireplace offers the option of multiple front styles and finishes, enabling homeowners to customize the look to match their décor preferences. The low-profile design enhances the overall elegance, creating a focal point in the room without overwhelming the space.

The technology integrated into the LifeStyle 6000TRS-CD further elevates its functionality. Featuring advanced IntelliFire® ignition technology, this fireplace offers reliable, easy-to-use lighting options. The remote control option adds convenience, allowing users to adjust the flame and heat settings without leaving their seat.

In terms of performance, the LifeStyle 6000TRS-CD includes patented burner technology that creates realistic flame patterns and provides even heat distribution. This ensures that the warmth is felt throughout the room rather than just in one area.

Safety is also a top priority, as this fireplace incorporates a variety of features designed to ensure peace of mind. This includes glass safeguards, automatic shutoff systems, and cool-to-the-touch surfaces, making it a great choice for homes with children or pets.

Overall, the Heat & Glo LifeStyle 6000TRS-CD stands out as a premier choice for those looking to enhance their living space with a stylish and efficient gas fireplace. Its combination of aesthetic appeal, advanced technology, and safety features make it a top contender in the market for modern heating solutions.