Operation System Configuration | White Rodgers 1F92-71 instruction

ATTACH THERMOSTAT TO SUBBASE

IT IS RECOMMENDED THAT YOU SET OPTION SWITCHES TO DESIRED POSITION BEFORE ATTACH- ING ON SUBBASE (see OPERATION). IT IS ALSO

RECOMMENDED THAT YOU PROGRAM THE THERMOSTAT WITH BATTERY INSTALLED BEFORE ATTACHING ON SUBBASE (see OPERATION GUIDE for programming instructions).

POWER TO THERMOSTAT MUST BE OFF BEFORE

ATTACHING THERMOSTAT TO WALL. FAILURE TO

TURN OFF POWER BEFORE ATTACHING THERMO-

STAT MAY CAUSE EQUIPMENT DAMAGE DUE TO

RAPID COMPRESSOR CYCLING.

ENGAGE TWO UPPER GUIDES;

PIVOT DOWN

To attach thermostat to subbase, line up the plastic snap

guides at the top of the thermostat and the 4 connector Figure 7. Attaching thermostat to subbase pins on the thermostat with the connectors near the top

right section of the subbase (when viewed from the front). Gently pivot the thermostat down until the 8-pin connec- tors and the plastic snaps lock into place (see fig. 7). Be gentle when attaching thermostat. If the thermostat does not seem to be attaching to the subbase easily, make sure that the connector pins and plastic snaps are properly aligned, and that excess wire is pushed into the wall. Damage to the thermostat may occur if force is used.

OPERATION

SYSTEM CONFIGURATION

NOTE

ANY TIME AN OPTION SWITCH IS CHANGED, THE 9 VOLT ENERGIZER® BATTERY MUST BE REMOVED FOR A MINIMUM OF 2 MINUTES.

SET OPTION SWITCHES

1.Single Stage Compressor Heat Pump — with re- versing valve energized through B or O terminals

W1		Y1	Field jumper W1 & Y1
			Switch #1 OFF
ON			Switch #1 OFF
			Switch #2 OFF
			Switch #3 OFF
1 2	3 4		Switch #4 (see step 6)

2.Two Compressor (Split) System

W1		Y1	Field jumper W1 & Y1
W2		Y2	Field jumper W2 & Y2
			Switch #1 OFF
ON			Switch #1 OFF
			Switch #2 ON
			Switch #3 OFF
1 2	3 4		Switch #4 (see step 6)

4-pin connector	Battery
W18
Option switches	9-pin connector

Figure 8. Back of thermostat body

3.Multi-stage (Fossil Fuel) System — up to 3 heat stages and 2 cool stages

ON									Switch #1 ON
									Switch #2 OFF
									Switch #3 OFF
1 2 3 4									Switch #4 (see step 6)

4.Multi-stage (Electric Heat) System — up to 3 heat stages and 2 cool stages

ON									Switch #1 ON
									Switch #2 ON
									Switch #3 (see step 5)
1 2 3 4									Switch #4 (see step 6)

1F92-71 specifications

The White Rodgers 1F92-71 is a programmable thermostat designed to provide efficient temperature control for residential heating and cooling systems. Known for its user-friendly features and advanced technology, the 1F92-71 is a favorite among homeowners looking for convenience and energy savings.

One of the standout features of the White Rodgers 1F92-71 is its easy-to-read digital display. The large screen provides clear visuals of the current temperature, setpoint, and operational modes, making it simple for users to monitor and adjust their home’s heating and cooling settings. The intuitive interface allows for easy programming, so users can create customized heating and cooling schedules to fit their lifestyle.

The 1F92-71 includes a 7-day programming capability, which means homeowners can set different schedules for weekdays and weekends. This flexibility helps optimize energy consumption, allowing users to save on utility bills while ensuring comfort when they are at home. The thermostat can be programmed for four different periods each day, which provides greater control over heating and cooling patterns throughout the week.

In terms of technology, the White Rodgers 1F92-71 is compatible with a wide range of heating and cooling systems, including gas, oil, electric, and heat pump systems. This versatility makes it an ideal choice for various applications across different home environments. The thermostat also features a battery backup system, ensuring that programmed settings are retained even during power outages.

A notable characteristic of the White Rodgers 1F92-71 is its energy-saving mode, which helps reduce electricity consumption during peak hours. The thermostat can sense changes in the home’s temperature and adjust its settings accordingly, thus maintaining comfort while minimizing energy use. The device also includes an advanced temperature accuracy feature, which helps ensure that the home remains at the desired comfort level without unnecessary fluctuations.

In addition, the 1F92-71 includes an early start function that prepares your home for the set temperature before the scheduled time, thus creating a more consistent and comfortable living environment. Enhanced compatibility with Wi-Fi allows for remote access via mobile devices or smart home systems, giving users the convenience to change settings even when they’re away from home.

Overall, the White Rodgers 1F92-71 represents a combination of practicality, technology, and user-oriented design, making it a top choice for those seeking to enhance their home’s climate control systems.