Kicker SUBWOOFER SOLOX manual Baffle

Page 9

Mounting

6.Once the holes are marked remove template. Using a jigsaw

cutout the woofer hole and use a 3/8” drillbit for the mounting holes

WARNING!

You will need assistance for the following steps!

Baffle

7.Insert the SPLAT into the cutout and move into position.

8. Use masking tape to temporarily hold the SPLAT in place while securing the BAM. This tape can be removed after the corner hardware has been start-

ed.

9.With your assistant,

insert the BAM and start

the corner hardware. Now is the time you remove the unidirec- tional bonding strip!

(Tape) Tighten the dou- ble threaded studs to secure the BAM to the baffle.

10. Pull the wires out through the BAM and connect to the B3 Link of your choice. Make sure you are using proper polarity!

11. Remove the Gap Cap before inserting SPAIR.

8

SoloX Subwoofer

Image 9
Contents Page ModelS18X1/S18X2 Dealer Where Purchased Purchase DateFeatures FeaturesWiring WiringEnclosures Enclosures Sealed DesignSoloX Series Vented Enclosure Applications Vented DesignMounting MountingBaffle Mounting Specifications SpecificationsExcursion maximum SoloX Limited Warranty WarrantyWarranty

SUBWOOFER SOLOX specifications

The Kicker SoloX subwoofer stands out in the world of high-performance audio equipment, delivering unrivaled power and clarity for audiophiles and casual listeners alike. Boasting a unique design and cutting-edge technology, the SoloX is engineered to provide an exhilarating bass experience, making it a top choice for car audio enthusiasts and home theater setups.

At the heart of the Kicker SoloX is its impressive power-handling capability. Designed to handle up to 3,000 watts of peak power, this subwoofer can deliver deep, resonant bass that fills the room or vehicle with a rich, immersive sound. This power is complemented by its efficient design, allowing it to maximize sound output without compromising on quality. With a dual 2-ohm voice coil configuration, users benefit from flexibility in wiring options, making it easier to integrate the subwoofer into various audio systems.

The SoloX features an innovative cone design made from a high-strength material that not only enhances durability but also contributes to the overall sound quality. The injection-molded polypropylene cone is lightweight yet robust, ensuring minimal distortion during high-performance use. Moreover, the subwoofer is equipped with a premium surround that allows for greater cone movement, resulting in an increased output level and an extended frequency response that produces deep, booming lows.

For those looking for efficient cooling, the SoloX utilizes advanced thermal management technology. The subwoofer features a large, optimized vent system designed to dissipate heat effectively, preventing overheating during extensive use. This feature is especially beneficial in high-volume environments, ensuring consistent performance without the risk of damage.

The Kicker SoloX also incorporates a patented equilizer and advanced motor structure that contribute to its superb linearity and fidelity. The result is a clean, distortion-free sound that enables the listener to experience music and sound effects in their full glory, capturing even the finest details.

In summary, the Kicker SoloX subwoofer combines power, durability, and innovation, making it an exceptional choice for anyone seeking to elevate their audio experience. With its robust construction, advanced technologies, and impressive performance metrics, the SoloX promises to deliver deep, rich bass that is sure to impress even the most discerning listeners.