Vermont Casting NVC36, NVC43, NVC39 warranty Installation & Operating Instructions, Ansi Z223.1/NFPA

Page 3

NVC Series B-Vent

Installation & Operating Instructions

This gas appliance should be installed by a qualified installer in accordance with local building codes and with current CSA-B149.1Natural Gas and Propane In- stallation Code. If the unit is being installed in a mobile home, the installation should comply with the current CAN/CSA Z 240.4 code. For U.S.A Installations follow local codes and/or the current National Fuel Gas Code

ANSI Z223.1/NFPA 54.

In the Commonwealth of Massachusetts, all gas fitting and installation of this heater shall only be done by a licensed gas fitter or licensed plumber.

FOR SAFE INSTALLATION AND OPERATION PLEASE NOTE THE FOLLOWING:

1.This appliance gives off high temperatures and should be located out of high traffic areas and away from furniture and draperies.

2.Children and adults should be alerted to the hazards of the high surface temperatures of this appliance and should stay away to avoid burns or ignition of clothing.

3.Children should be carefully supervised when they are in the same room as your appliance.

4.Under no circumstances should this appliance be modi- fied. Parts having to be removed for servicing should be replaced prior to operating this appliance again.

5.Installation and any repairs to this appliance should be carried out by a qualified service person. A professional service person should be contacted to inspect this appli- ance annually. Make it a practice to have all of your gas appliances checked annually. More frequent cleaning may be required due to excess lint and dust from carpeting, bedding material, etc.

6.Control compartments, burners and air passages in this appliance should be kept clean and free of dust and lint. Make sure that the gas valve and pilot light are turned off before you attempt to clean this unit.

7.The venting system (chimney) of this appliance should be checked at least once a year and if needed your venting system should be cleaned.

8.Keep the area around your appliance clear of combustible materials, gasoline and other flammable vapor and liquids. This appliance should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung in the area of it.

9.Under no circumstances should any solid fuels (wood, coal, paper or cardboard etc.) be used in this appliance.

10.The flow of combustion and ventilation air must not be obstructed in any way.

11.Whether the appliance is installed directly on carpeting, vinyl tile or any combustible material other than wood, this appliance must be installed on a metal or wood panel extending the full width and depth of the appliance.

12.This appliance requires adequate ventilation and combus- tion air to operate properly.

13.this fireplace must not be connected to a chimney flue serving a separate solid fuel burning fireplace.

14.When the fireplace is not in use it is recommended that the gas valve be left in the OFF position.

The appliance and its individual shutoff valve must be discon- nected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.45 kPa).

This appliance may be installed in an aftermarket permanently located, manufactured home or mobile home, where not prohibited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.

WARNING: Check with your electronics manufactur- er before installing a television or other electronic device above this fireplace.

IMPORTANT:

PLEASE READ THE FOLLOWING CAREFULLY

Remove any plastic from trim parts before turning the fireplace ON.

It is normal for fireplaces fabricated of steel to give off some expansion and/or contraction noises during the start up or cool down cycle. Similar noises are found with your furnace heat exchanger or car engine.

It is not unusual for your gas fireplace to give off some odor the first time it is burned. This is due to the curing of the paint and any undetected oil used in the manufacturing process.

Please ensure that your room is well ventilated - open all windows.

It is recommended that your burn your fireplace for at least ten (10) continuous hours the first time you use it. If the optional fan kit has been installed, place the fan switch in the “OFF” position during this time.

Proposition 65 Warning: Fuels used in gas, wood- burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth de- fects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

20000194

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Decorative Gas Appliance Models NVC36, NVC39, NVC43 Table of Contents Installation & Operating Instructions Ansi Z223.1/NFPAPlease Read the Following Carefully Appliance Dimensions Fireplace DimensionsAppliances Clearance to CombustiblesMantels HearthGas Inlet & Manifold Pressures Framing and FinishingFinal Finishing Gas SpecificationsGas Line Installation Remote Switch InstallationAlternate Switch Location EB-1 Electrical Box Install the Venting System Flashing and TerminationVenting Runs Operating Instructions Lava Rock Ember Material PlacementFlame Adjustment Flame CharacteristicsInspecting the Venting System Test Chimney DrawFirst Firing What to do if YOU Smell GAS To Turn Off Gas To HeaterElectrical Connection Vent Safety SwitchHoneywell Electronic Ignition TroubleshootingStart YESYES Check Nova SIT 820 Standing Pilot StartBrass Trim MaintenanceCleaning the Standing Pilot Control System Burner and Burner Compartment11a DescriptionNVC36/39/43 Fan Kits Optional AccessoriesHard Direct Wire Hook-Up FK12 Fan AssemblyRemote Controls Ceramic Refractory PanelsArched Door Front Decorative Frame Trims Decorative Bay WindowsNVC Series B-Vent NVC Series B-Vent NVC Series B-Vent Limited Lifetime Warranty Model EnerGuide Ratings Fireplace Efficiency % Efficiency Ratings

NVC39, NVC36, NVC43 specifications

Vermont Castings is known for its commitment to quality and craftsmanship, and its NVC series of gas stoves, including the NVC39, NVC36, and NVC43, exemplify this tradition. These models provide both warmth and aesthetic appeal, making them popular choices for homeowners seeking a blend of efficiency and style in their heating solutions.

The NVC39 is designed for larger spaces, boasting a heating capacity that can warm up to 2,000 square feet, making it suitable for open-concept living areas or larger rooms. It features a generous viewing area, allowing residents to enjoy the mesmerizing flames while creating an inviting atmosphere. With an impressive efficiency rating, the NVC39 ensures that fuel consumption is minimized, resulting in lower heating costs.

Moving to the NVC36, this model offers a slightly more compact design without compromising on power. It is an ideal choice for medium-sized rooms and comes equipped with the same high-efficiency rating as the NVC39. This model is particularly favored for its easy-to-use controls, allowing users to adjust the flame and heat output effortlessly. Its stunning cast iron construction not only provides durability but also enhances the classic aesthetic Vermont Castings is renowned for.

The NVC43 is the largest of the trio, making it perfect for those looking for a powerful heating solution for extensive spaces. With its capable output, it can effectively heat areas over 2,500 square feet. Like its counterparts, the NVC43 integrates modern technology with traditional design. It features an advanced ignition system that ensures reliable starting every time. Furthermore, it is designed with an oxygen depletion sensor, prioritizing safety by automatically turning off the unit if oxygen levels drop to unsafe levels.

All three models come with customizable options, allowing the user to personalize their stove with various finishes and styles. Add-on features like ceramic glass doors and optional blowers enhance their functionality and aesthetics. In addition, they incorporate a burn system that maximizes heat output while minimizing emissions, aligning with Vermont Castings' commitment to environmental stewardship.

Overall, the Vermont Castings NVC series combines advanced technology, character, and efficiency, providing homeowners with versatile options that meet both heating needs and design preferences. They are ideal for anyone seeking the practicality of modern heating with the beauty of classic craftsmanship.
Top Page Image Contents