Connection to Gas Supply

Damper Stop Installation:

For Use With All Other Fireplaces

The Damper Stop provided keeps your damper from accidentally closing during operation of your set. This Damper Stop must be installed onto your Damper at all times. NOTE: The damper clamp is designed to hold the damper plate open 3 inches. However, the damper must be fully open when the log set is in operation.

Install the Damper Stop onto the edge of the damper plate. Attach by securing the bolt pro- vided to the damper plate with an adjustable wrench. (Fig. 3)

If the Damper Stop does not fit, drill a 1/4” hole into the damper plate and install an

anchor bolt with nut, at a 90 degree angle, so that the damper plate will remain fully open.

The proper finished installation of the Damper Stop is shown in Figure 4. If the bolt fails to block the damper in an open position, the damper should be removed from the chimney.

To check your vent for proper drafting: Light a tightly rolled newspaper on one end and place it at the inside front edge of the fireplace. Observe the smoke and be sure the vent is properly drawing it up the chimney. If the smoke is drawn back into the room, extinguish the flame and

Damper Plate

Damper Stop

Figure 3

DP104

Damper

Clamp

Damper

Figure 4

DP103

1.Place the burner pan in the fireplace. The burner pan should be located several inches from the back wall, centered from right to left. NOTE: This is for burner connection purposes only. Exact burner placement will be covered on page 8, after all connections have been made.

2.Attach the Gas Supply Fitting onto your fireplace’s gas supply pipe, as shown in Figure 5.

3.Attach one end of the Flexible Gas Connector to the brass Burner Inlet Fitting which has been factory installed into the burner.

4.Attach the other end of the Gas Connector to the flared side of the Gas Supply Fitting.

Remember to use pipe thread sealant or teflon tape only on the straight pipe threads. Do not use on any flared ends.

Figure 5a

CFM149

20003889

R24CFL, R18CFL, R30CFL specifications

Vermont Castings is a renowned name in the world of cast iron stoves and fireplaces, known for its commitment to quality, durability, and efficiency. Among its stellar lineup, the R30CFL, R24CFL, and R18CFL models stand out as premier options for those looking for reliable heating solutions with distinctive features and innovative technologies.

The R30CFL, the largest of the trio, is designed to deliver an impressive output of heat while maintaining aesthetic appeal. Its capacity to hold larger logs makes it perfect for extended burn times, ensuring your home stays warm and cozy throughout the night. The R30CFL also features an advanced air wash system that keeps the glass clean, allowing for unobstructed views of the captivating flames. With its robust construction and elegant design, this model is not only functional but also a beautiful addition to any living space.

The R24CFL offers a perfect balance of size and efficiency. It is engineered to provide sufficient heat for medium to larger spaces while maintaining an energy-efficient burn, thanks to Vermont Castings' patented Low Emission Technology. This model is particularly noted for its easy-to-use single lever control that allows users to adjust air intake effortlessly, optimizing combustion and enhancing the overall heating performance. The R24CFL's sleek design and customizable options for finish and door styles give homeowners the flexibility to integrate it seamlessly into their decor.

For those with smaller spaces, the R18CFL is an ideal choice. Despite its compact size, it does not compromise on heating capability. This model is optimized for urban settings or smaller homes where space is at a premium. The R18CFL boasts a robust steel body combined with cast iron elements that ensure durability while providing a modern look. Like its larger counterparts, this model features an efficient combustion system that minimizes emissions, making it an environmentally friendly option.

All three models, R30CFL, R24CFL, and R18CFL, come equipped with advanced technology that enhances their performance. Vermont Castings' commitment to environmentally responsible heating is evident in the certification of these stoves as EPA compliant, ensuring they meet rigorous standards for both efficiency and emissions.

In summary, the Vermont Castings R30CFL, R24CFL, and R18CFL represent a trifecta of excellence in the realm of wood-burning stoves. Their combination of style, efficiency, and cutting-edge technology makes them suitable for a variety of spaces and needs, ensuring that homeowners enjoy a warm and inviting environment while being mindful of their ecological impact.