Vermont Casting P, OD24SHKN For Your Safety Read Before Lighting, What To Do If You Smell Gas

Page 9

For Your Safety Read Before Lighting

WARNING: If you do not follow these directions exactly, a fire or explosion may result caus- ing property damage, personal injury, or loss of life.

What To Do If You Smell Gas

Do not try to light any appliance.

Do not touch any electrical switch, do not use any phone in the immediate area.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

Lighting Instructions

1. Turn the gas shut-off valve to OFF.

2. Wait five (5) minutes to clear out any gas. If you then smell gas STOP! Follow the safety information above. If you don’t smell gas, go on to the next step.

3. Light a match and lay it on top of the pan material, about 2” from the end of the supply side of the pan. (Fig. 14)

4. Slowly turn the gas shut-off valve ON until the burner ignites. If the burner doesn’t ignite within ten (10) seconds with the match burning, turn the shut-off valve OFF and repeat steps 1 through 4 again.

LG175

Match

Fig. 14 Lighting the log set.

WARNING: Flame may flare up when ignited. Keep hands and face away from firebox.

Operation and Maintenance

To Adjust the Flame:

Adjust the flame to the desired level by rotating the gas valve counterclockwise to open or

clockwise to close.

To Turn the Appliance Off:

Rotate the gas shut-off valve clockwise to off.

Proper Maintenance:

Keep the area around the log set clean and clear of debris.

Occasionally, you may use a soft bristle brush to clean logs.

Once every year, a qualified agency or certified chimney sweep should examine and clean the venting system of the fireplace in which the log set is installed.

Appliance Break-in

During the 2-3 hour appliance break-in period, you may detect an odor from the appliance as the various water-based paints used in the manufacture of this log set cure. This is a normal and temporary situation that is not a cause for alarm.

To ensure proper curing of the logs:

1.Ignite a 2” flame and maintain it for 1/2 hour.

2.Burn the logs in consecutive 1/2 hour periods, raising the flame an additional 2” to full flame height for a total of three hours.

20007967

9

Image 9
Contents Installation and Operation Instructions Installation Precautions General Information Minimum Clearances & Specifications Natural Gas Units Pre-Installation Checklist YesPropane Gas Units Tools RequiredAlternate left side gas connection Gas Plumbed on Left Hand Side of FireplaceDamper Stop Installation Leak Test ProceduresAdd Pan Material Grate Placement Grate AssemblyOptional Glass Door Set Log PlacementOperation and Maintenance For Your Safety Read Before LightingWhat To Do If You Smell Gas Lighting InstructionsBurner Is Excessively Noisy TroubleshootingOD24SHK Vented Gas Logs For Vermont Castings Decorative Gas Appliances Limited 2/20 Year Warranty

OD24SHKN, P specifications

The Vermont Casting P,OD24SHKN is a remarkable addition to the world of wood-burning stoves, combining classic design with the latest technology for an efficient and enjoyable heating experience. This model is specifically engineered to provide warmth and ambiance, making it an ideal choice for homes looking to maintain a cozy atmosphere during the colder months.

One of the main features of the P,OD24SHKN is its robust construction. Crafted from high-quality cast iron, this stove not only ensures durability but also enhances heat retention, providing long-lasting warmth even after the fire has died down. The cast iron material allows for even heat dispersion, ensuring that every corner of the room receives consistent warmth.

The P,OD24SHKN is outfitted with Vermont Castings' advanced air wash system. This technology helps keep the glass door clean, allowing for an unobstructed view of the mesmerizing flames. The air wash system channels a stream of air across the glass, reducing soot buildup and ensuring that the beauty of the fire is always on display.

A standout characteristic of the P,OD24SHKN is its efficient burning process. It features an innovative catalytic combustor that maximizes fuel efficiency, reducing emissions while generating significant heat. This not only minimizes the environmental impact but also helps users save money on their heating bills by utilizing less wood to achieve optimal warmth.

The stove is designed with user convenience in mind, featuring a simple-to-use damper control that allows for easy adjustment of airflow based on the desired heat output. The front-loading design makes it easy to load firewood, and the large firebox can accommodate longer logs, extending burn times between reloads.

Additionally, the Vermont Casting P,OD24SHKN is versatile in terms of aesthetic appeal. It comes in a range of finishes, allowing homeowners to choose a style that complements their interior décor. The classic lines and intricate detailing of the cast iron contribute to a timeless charm, making it not only a source of heat but also an eye-catching centerpiece in any room.

In summary, the Vermont Casting P,OD24SHKN wood stove embodies the perfect blend of tradition and modern technology, featuring durable cast iron construction, advanced combustion systems, and user-friendly operation. It offers homeowners an efficient and stylish heating solution that stands the test of time. Whether for practical warmth or aesthetic enhancement, this model is a worthy investment for any home.