Country Flame 400, 500 manual Model

		1			2
			H	I
					4		G
							3
		11					5
F	10	9			9	10	6
				7
					8		10
							131/4"
				A
				B	131/4"
				C
				D
				E

	Model 33	Model 37	Model 42
	33" Firebox width	37" Firebox width	42" Firebox width
	approx. 530 lbs.	approx. 580 lbs.	approx. 630 lbs.
A.	38" overall width	42" overall width	48" overall width
B.	50" wide with insulation	54" wide with insulation	60" wide with insulation
	& concrete blocks	& concrete blocks	& concrete blocks
C.	76" wide with return	80" wide with return	86" wide with return
	air grilles	air grilles	air grilles
D.	84" wide with return air	88" wide with return air	94" wide with return air
	grilles and brick	grilles and brick	grilles and brick
E.	92" wide concrete base	96" wide concrete base	102" wide concrete base
F.	48" tall	48" tall	48" tall
G.	26" deep	26" deep	26" deep
H.	6" duct diameter	8" duct diameter	8" duct diameter
I.	13"x13" flue tile	13"x13" flue tile	13"x17" flue tile

Features

1.(2) Duct Adapter Rings (optional)

2. Flue

3.Heat Grille Holder

4. Heat Grille

5.Heat Sensor (mounting bracket behind grille)

6.Electrical Connection Box

7.Ash Dump with Sliding Cover

8.1/2" x 3" Grates and Andirons (optional)

9.(2) Return Air Grilles

10.(2) 525 CFM Blowers with

Individual Variable Speed Controls

11.Rotary Damper Rod

The Country Flame Fireplace Furnace is a full masonry unit, to be installed according to Chapter 37 of the Uniform Building Code.

Also Included

1 Wall Thermostat

1 Sliding Ash Dump Cover

1 Clean-Out Door

2 Variable Speed Controls

1 Heat Sensor

1 Roll Insulation

150 Michigan St. S.E., Hutchinson, MN 55350

Phone: (800) 495-3196 Fax: (320) 587-8872

information@magnumheat.com

www.countryflame.com

V1004A

This cutaway drawing shows the Country Flame Fireplace Furnace’s inside heat exchanger area. This advanced design transfers fireplace heat to moving air masses; two 525 CFM blowers move this warmed air gently through the duct system into the home. While BTU outputs of up to 175,000 per hour are easily generated, the design of the Fireplace Furnace allows it to provide adequate heat levels from a bed of coals or smaller-size fires.