Important Safety Advice, Electrical, General

Installation and Operating Instructions

Wall Fire SP4 Model No: SP4

08/18936/0 Issue 0

Dimensions

(millimetres)

Fig. 1

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.

Important Safety Advice:

When using electrical appliances, basic precautions should be followed to reduce the risk of fire, electric shock, and injury to persons, including the following :

•If the appliance is damaged, check immediately with the supplier before installation and operation.

•Do not use this heater in the immediate surroundings of a bath, shower or swimming pool.

•Do not use outdoors.

•This heater must not be located immediately above or below a fixed socket outlet or connection box.

•Do not cover - Overheating will result if the heater is accidentally covered.

•In the event of a fault unplug the heater.

•Unplug the heater when not required for long periods.

•Although this heater complies with safety standards, we do not recommend its use on deep pile carpets or on long hair type of rugs.

•Do not leave young children, the elderly, or the infirm unsupervised in the vicinity of the heater.

•The appliance must be positioned so that the plug is accessible.

•If the supply cord is damaged it must be replaced by the manufacturer or service agent or similarly qualified person in order to avoid a hazard.

Electrical

WARNING – THIS APPLIANCE MUST BE EARTHED

This heater must be used on an AC ~ supply only and the voltage marked on the heater must correspond to the supply voltage.

Do not switch the appliance on until properly installed. Please read all the safety warnings and operating instructions.

General

Unpack the heater carefully and retain the packaging for pos- sible future use, in the event of moving or returning the fire to your supplier.

Contents of Carton.

•SP4 Heater.

•Wall fixing bracket.

•Six fixing screws and six wall plugs.

•Remote control and batteries ( 3 AAA’s type).

•Spare bulb.

Do not connect the heater to an electricity supply until it is installed on a wall correctly. - see ‘Installation’.

When in operation there is a 300 watt heat output from the fuel effect, and an additional 120 watt output when the heated glass panel is in operation.

The heater can be used remotely or manually. - see ‘Opera- tion’.

General features of remote control are:

•Activate/Deactivate heated glass panel.

•The illumination of fuel effect can be increased or decreased.

•Programmable timer.

Please note: Used in an environment where background noise is very low, it may be possible to hear the motor which oper- ates the flame effect. This is normal and should not be a cause for concern.

SP4 specifications

The Faber SP4 is a state-of-the-art range hood that seamlessly blends innovative technology with modern design, making it an essential addition to any contemporary kitchen. Known for its powerful performance and aesthetic appeal, the SP4 combines functionality with sophistication.

One of the standout features of the Faber SP4 is its impressive suction power. With a high CFM (cubic feet per minute) rating, it effectively removes smoke, odors, and grease from the air, ensuring a clean and comfortable cooking environment. The multi-speed fan options allow users to adjust the ventilation intensity based on their cooking needs, whether simmering sauces or searing meats.

The SP4 is designed with advanced noise-reduction technology, providing a quieter operation compared to traditional range hoods. This feature is particularly appreciated in open-concept kitchens, where excessive noise can disrupt the flow of conversation. The hood operates at various sound levels, allowing for a pleasant cooking experience.

A key characteristic of the Faber SP4 is its stylish and sleek design. Available in various finishes, including stainless steel and glass, it complements modern kitchen aesthetics. The minimalist design enhances the visual appeal while maintaining a strong presence above the cooking area.

In addition to its performance and design, the SP4 boasts easy-to-use controls. The intuitive interface allows users to quickly adjust settings and toggle between fan speeds and lighting. The integrated LED lighting illuminates the cooktop efficiently, providing optimal visibility while consuming less energy than traditional bulbs.

Furthermore, the SP4 is equipped with a dishwasher-safe aluminum mesh filter that captures grease particles without compromising airflow. This feature simplifies maintenance, as the filter can be easily removed and cleaned, ensuring the range hood operates at peak efficiency.

The Faber SP4 also supports various installation options, including wall-mounted and under-cabinet installations, providing flexibility to fit diverse kitchen layouts. Its compact size ensures that it doesn’t overpower the kitchen space, while still delivering robust performance.

In conclusion, the Faber SP4 range hood stands out as a superior choice for homeowners seeking efficiency, style, and ease of use in their kitchen ventilation solutions. Its thoughtful features and modern design make it an exemplary model in today’s competitive market.