Cabinet Installations

Cabinets are available from your dealer which allow for fast, convenient installation of your fireplace against exist- ing walls.

ELECTRICAL CONNECTION

A 15 AMP, 240 Volt, 50 Hz circuit with a properly grounded outlet is required. Preferably, the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard with a 7 ft. (2134 mm) long three wire cord, exiting the right side of the fireplace. Plan the installation to avoid the use of an extension cord. If an extension cord must be used, it must be a minimum 16AWG, three wire with grounding type plug and connector and rated not less than 2500 Watts.

A new electrical outlet can be installed inside the frame construciton, if permitted by local codes.

Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electrical shock and injury to persons.

Do not use this fireplace if any part of it has been under water. Immediately call a qualified service technician to inspect the fireplace and replace any part of the electrical system which has been under water.

Hard (Direct) Wire Connection

If desired, a qualified electrician may remove the cord conection and wire this unit directly to the household wiring.

Any electrical re-wiring of this appliance must be done by a qualified electrician.

WARNING: Safe use plug must be accessible after installation.

WARNING: This appliance is fitted with a non-rewireable plug. If it’s necessary to change the fuse in a plug. The fuse cover must be refitted. If the fuse cover is lost or damaged, the plug must not be used until it is replaced. It is important that the colour of the replacement fuse cover corresponds with the colour markings on the base of the plug. An ASTA approved BS1362 fuse rated at 13A should be used.

CfM125

INSTALLATION OF LOGS

1.Turn off power to the unit.

2.Remove front glass (See "Glass Removal" section).

3.Remove logs from packaging.

4.The ember bed is shipped in place. No adjustment is necessary.

5.Install rear left log (A15). Use notches to have a proper location.

6.Install rear right log (A16). Use notches to have a proper location.

7.Install front left log (A13). Use notches to have a proper location.

8.Install front right log (A14). Use notches to have a proper location.

Fig. 6

- 6 -

DEF33CE specifications

The Vermont Castings DEF33CE is a finely engineered direct vent gas fireplace that exemplifies the perfect blend of style, efficiency, and innovative technology. Designed for contemporary living spaces, this fireplace unit combines both aesthetic appeal and functional benefits, making it a popular choice among homeowners looking for an elegant heating solution.

One of the standout features of the DEF33CE is its striking ceramic glass front, which not only enhances the beauty of the flame display but also provides a clear view of the fire from multiple angles. The fireplace encapsulates the warmth of a traditional fire while benefiting from a modern design. Its compact size allows for versatile installation options, fitting seamlessly into various room layouts.

Efficiency is at the forefront of Vermont Castings' design philosophy, and the DEF33CE is no exception. With an impressive efficiency rating, this fireplace delivers significant warmth while minimizing energy consumption. It is capable of producing up to 30,000 BTUs, ensuring that rooms remain cozy and comfortable during the colder months without incurring excessive heating costs.

The incorporation of advanced technology is another hallmark of the DEF33CE. Equipped with a thermostatic remote control, users can easily adjust the temperature and flame height according to their preferences. This feature not only enhances user convenience but also contributes to energy efficiency by allowing for precise control over heating output.

Another important characteristic of the DEF33CE is its direct venting system, which facilitates safe operation by drawing air for combustion from outside the home and venting exhaust in the same manner. This system minimizes heat loss and helps maintain indoor air quality, making it an excellent choice for modern, energy-efficient homes.

The DEF33CE is also designed with flexibility in mind. It offers various decorative options, including realistic log sets and river stones, allowing users to customize the look of the fireplace to suit their interior design. Whether you're after a rustic charm or a sleek modern feel, the DEF33CE presents versatile aesthetics.

Vermont Castings backs its products with a strong reputation for quality craftsmanship and durability. The DEF33CE is built from high-quality materials designed to withstand the test of time, ensuring that it continues to provide warmth and charm for many years to come.

In summary, the Vermont Castings DEF33CE combines style, efficiency, and cutting-edge technology, making it an ideal heating solution for modern homes. Its elegant design, high efficiency, user-friendly controls, and customizable options ensure that it meets the diverse needs of today’s homeowners.