LG Electronics LH-E9674 owner manual Additional features, Time Search DVD DivX

Notes on general features:

If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels.

Zoom may not work on some DVDs.

The A-B repeat function is available only in the current title.

Additional features

Time Search DVD DivX

To start playing at any chosen time on the disc:

1.Press DISPLAY during playback.

2.Press v / V to select the time clock icon and “--:--:--” appears.

3.Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers.

4.Press ENTER to confirm. Playback starts from the selected time.

Marker Search DVD DivX

To enter a Marker

You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers.

To Recall or Clear a Marked Scene

1.During disc playback, press SEARCH. The marker search menu appears on the screen.

2.Within 10 seconds, press b / B to select a marker number that you want to recall or clear.

3.Press ENTER and playback starts from the marked scene. Or, Press CLEAR and the marker number is erased from the list.

4.You can play any marker by inputting its number on the marker search menu.

Last Scene Memory

DVD

This receiver memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the receiver or switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled.

Note:

This receiver does not memorize the scene of a disc if you switch off the receiver before commencing to play the disc.

Sleep Timer Setting

You can set the unit to turn off automatically at a specified time.

1.Press SLEEP to set the desired sleep time.

The SLEEP indicator and sleep time appears in the display window.

2.Each time you press SLEEP the setting changes in the following order.

SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →OFF

Note:

•You can check the time remaining before the unit

turns off.

Press SLEEP. The remaining time appears in the display window.

Dimmer

This function will change the brightness of the display window on the front panel during in power-on status.

Press the DIMMER repeatedly.

Button’s light turn off → Display window make din → Display window and Button’s light are on

Mute

Press MUTE to mute your unit.

You can mute your unit in order, for example, to answer the telephone, “MUTE” indicator flashes in the display window.

Press MUTE again or adjust the volum to release it.

Using Headphone Jack

Connect a stereo headphone plug (3.5mm) into the PHONES connector.

The speakers are automatically disconnected when you plug in a headphone (not supplied).

The unit volume and headphone volume have to adjust separately..

26