QUICK REFERENCE GUIDE FOR THE ELECTRIC FIREPLACE
1.Prior to the first use of the fireplace verify the following:
∙Are the circuit breakers for the fireplace on?
∙Are the light bulbs in your fireplace loose? (to check, follow the instructions for replacing the light bulbs under the maintenance section of this manual)
2.The heater on your fireplace may emit a slight, harmless odor when first used. This odor is a normal condition caused by the initial heating of internal heater parts and will not occur again.
3.If your heater does not emit heat, ensure the large switch is on, the wall thermostat is set above the current room temperature and any wall switches for the unit are on. If this does not work, switch the unit off for 5 minutes and try again. Consult operation section of your practical users guide for further information.
4.The information regarding the model of your fireplace can be found on the rating plate located under the logs in the lighting area.
5.If you have any technical questions, questions regarding the operation of your fireplace , or require service for your fireplace contact Dimplex North America customer service at