Fireplace Installation, NEW Wall Construction

FIREPLACE INSTALLATION

1.Install the fireplace assembly into the mantel. (refer to mantel assembly instructions)

NOTE 1

A 15 AMP, 120 VOLT circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit breaker trips or fuse blows on a regular basis when the heater is operating. Additional appliances on the same circuit may exceed the current rating of the circuit breaker.

IMPORTANT

If not using a Dimplex mantel, the fireplace must be installed in an enclosure with the following MINIMUM internal/opening dimensions.

NEW WALL CONSTRUCTION

1.Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic.

2.Place the fireplace in the desired location to see how it will look in the room.

3.Mark the desired location on the floor and store the fireplace in a safe, dry and dust free location.

4.Use studs to frame an opening of 30 ½” wide X 25 ¾” high X 11 ¾” deep.

Option #1-The power cord can be lead from behind the trim and along the wall to an outlet near the fireplace.

Option #2-A new outlet can be installed inside the new frame construction.

Plug the unit into a 15Amp/120Volt outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1875 watts.

DF3015 specifications

The Dimplex DF3015 is an innovative and efficient electric heater designed to provide warmth and comfort in a wide range of spaces, from residential rooms to commercial environments. With its sleek and modern design, the DF3015 not only serves a practical purpose but also complements various home decors.

One of the standout features of the Dimplex DF3015 is its advanced heating technology. It is equipped with a high-efficiency fan-forced heating system that ensures even distribution of warm air throughout the room. This fan-assisted feature quickly raises the ambient temperature, making it ideal for cold days and nights.

The DF3015 boasts a powerful output of 3000 watts, making it suitable for larger spaces or for instances where rapid heating is necessary. Its adjustable thermostat allows users to set and maintain their desired temperature effortlessly, providing a tailored heating solution that adapts to individual needs.

Safety is a crucial aspect of the Dimplex DF3015 design. It includes features such as an integral overheat protection system, which automatically shuts off the heater if it detects an unsafe temperature, preventing potential fire hazards. Additionally, the heater is designed with a tip-over switch that ensures it will power off if knocked over, making it a safe choice for homes with pets or small children.

Portability is another advantage of the Dimplex DF3015. It includes convenient carry handles and is lightweight, allowing users to move it from room to room with ease. This adaptability makes it an appealing solution for those looking to heat specific areas without installing permanent heating systems.

The DF3015 also features a quiet operation mode, making it suitable for bedrooms or living areas where noise levels should be minimized. This ensures that users can enjoy a comfortable environment without the distraction of a loud heater.

In summary, the Dimplex DF3015 is a powerful, safe, and energy-efficient electric heater that combines modern design with practical features. Its fan-forced heating, adjustable thermostat, and safety mechanisms make it a reliable choice for anyone seeking to enhance their indoor comfort. With the Dimplex DF3015, users can look forward to a warm and cozy atmosphere no matter the season.