Fireplace Installation | ||
Unpacking Instructions | Figure 2 | |
The fireplace insert is packed with |
| |
the front glass panel separated |
| |
and uninstalled from the fireplace. |
| |
Care must be taken to unpack the |
| |
fireplace so as not to damage the |
| |
front glass. |
| |
1. Stand the packaged fireplace |
| |
upright as indicated on the |
| |
carton (Figure 1). |
| |
2. Open the top of the carton | Figure 3 | |
and locate which side the | ||
| ||
glass is placed. |
| |
3. Remove remote control and all plastic bags containing hardware etc.
4. Lay carton flat on a level sur- face so that the glass panel faces up (Figure 2).
5. | Supporting the glass panel, | Glass | End Cap |
| remove one of the styrofoam | ||
|
|
| |
| end caps. | Figure 4 |
|
6. | Remove glass panel from |
|
|
| styrofoam packaging. |
|
|
7. | Remove glass and fireplace |
|
|
| from all packaging and plastic |
|
|
| wrap. |
|
|
8. | Remove the temporary wood |
|
|
| frame from the firebox by |
|
|
| removing the six (6) screws |
|
|
| and washers as shown in |
|
|
| Figure 3. |
| Wood Frame |
|
|
| 7 |