Dimplex milano-ef manual Operation, Three position ON/OFF switch, Heater ON/OFF Switch

Page 5

NOTE

A 15amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit breaker trips or fuse blows on a regular basis when the heater is operating. Additional appliances on the same circuit may exceed the current rating of the circuit breaker.

WARNING

Ensure the power cord is not installed so that it is pinched or against a sharp edge and ensure that the power cord is stored or secured to avoid tripping or snagging to reduce the risk of fire, electric shock or injury to persons.

Construction and electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electric shock and injury to persons.

Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician.

milanoef INSTALLATION

1.Make sure the unit is switched OFF (refer to operating instruction section).

2.Plug the unit into a 15Amp/120volt outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1875 watts.

OPERATION

To access the controls go to the back of the milanoef.

A. Three position ON/OFF switch

The switch has two ON positions marked with “-“ and “=”. The “-“ position is for manual operation.

In this position the built-in remote control is bypassed.

The “=” position is for operating the unit with the provided remote control.

When in “=” position the unit is operated with the ON and OFF buttons of the remote control.

When the switch is in the center position the unit is off.

B. HEATER ON/OFF SWITCH

The HEATER ON/OFF SWITCH supplies power to the heater fan and the heater element.

C. HEATER THERMOSTAT CONTROL

To adjust the temperature to your individual requirements, turn the thermostat control clockwise all the way to turn on the heater. When the room reached the desired temperature, turn the thermostat knob counter clockwise until you hear a click. Leave in this position to maintain the room temperature at this setting. For additional heat, turn clockwise until you hear the click again and the heater will turn on. To turn the heater off, switch the HEATER ON/OFF SWITCH to the OFF position.

NOTE:- When the heater is switched ON, the heater fan will operate. The heater element may or may not be on, depending on the thermostat control setting (SEE “HEATER THERMOSTAT CONTROL”).

2

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Practical USER’S Guide Contents Quick Reference Guide for milanoef Please Retain this USER’S Guide for Future Reference Important InstructionsHeater ON/OFF Switch Three position ON/OFF switchOperation Heater Thermostat ControlMaintenance Resetting the Temperature Cutoff SwitchBattery Replacement Light Bulb ReplacementUpper Light Bulb Requirements Glass CleaningTo Replace the Lower Light Bulbs To Replace the Upper Light BulbPage Products to which this limited warranty applies TWO Year Limited WarrantyProducts excluded from this limited warranty What this limited warranty covers and for how longWhat Dimplex will do in the event of a defect What you must do to get service under this limited warrantyHow State and Provincial law apply Dimplex

milano-ef specifications

The Dimplex Milano-EF electric fireplace is a modern and stylish heating solution designed to bring warmth and ambiance to your living space. With its unique combination of efficiency, aesthetics, and advanced technology, the Milano-EF stands out as a top choice for homeowners seeking contemporary comfort.

One of the most appealing features of the Dimplex Milano-EF is its realistic flame effect. The patented Dimplex Opti-myst technology uses water vapor to create an incredibly lifelike flame and smoke effect. This innovative approach not only enhances the visual appeal of the fireplace but also ensures a safe and smoke-free environment, making it suitable for homes without traditional venting systems.

The Milano-EF is designed with energy efficiency in mind. It features a powerful electric heating element that can warm up spaces quickly while allowing users to adjust the heat output according to their preference. This ability to control heating ensures that energy is used efficiently, reducing costs while maintaining comfort. Additionally, the unit operates quietly, providing a peaceful atmosphere without the crackle of traditional wood-burning fires.

Installation of the Dimplex Milano-EF is hassle-free, as it does not require a chimney or flue. This flexibility means it can be placed in various locations throughout the home, from living rooms to bedrooms, enhancing the decor without major renovations. Its sleek, contemporary design ensures that it complements various interior styles, making it a versatile choice for modern homes.

Safety is paramount, and the Milano-EF is equipped with advanced features such as an automatic shut-off functionality, which activates in the event of overheating. This provides peace of mind for families with children or pets, making it a secure option for any household.

Another highlight of the Dimplex Milano-EF is its user-friendly controls. The integrated remote control allows users to effortlessly adjust the heat settings and flame effects from the comfort of their seating area. Additionally, it includes a programmable timer, giving you the freedom to set heating schedules that align with your daily routine.

In conclusion, the Dimplex Milano-EF electric fireplace combines advanced technology, stylish design, and exceptional safety features to create an ideal heating solution for today's homes. Its realistic flame effect, efficient heating capabilities, and ease of installation make it a standout choice for anyone looking to enhance their living space with both functionality and elegance.
Top Page Image Contents