LG Electronics LHT764 XTS/XTS pro, Displaying Disc Information On screen, Initial Settings

XTS/XTS pro

Each time you press XTS pro the setting changes in the following order.

XTS ON → NORMAL → XTS-P ON...

XTS-P ON

The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source.

XTS ON

When playing a movie with weak bass relative to the general music, it forces sound to the woofer. In the mode of 2 CH BYPASS, It creates the high display effect by playing the sound source via the rear speakers same as the front speakers.

Note:

The XTS mode is temporarily disabled when changing from 2.1 CH to 5.1 CH and it is enabled when changing it to 2.1 CH.

Displaying Disc Information On - screen

You can display various information about the disc loaded on-screen.

1.Press DISPLAY to show various playback information.

Thedisplayed items differ depending on the disc type or playing status.

2.You can select an item by pressing v / V and change or select the setting by pressing b / B.

Title (Track) – Current title (or track) number/ total number of titles (or tracks).

Chapter – Current chapter number/total number of chapters.

Time – Elapsed playing time.

Audio – Selected audio language or channel. Subtitle – Selected subtitle.

Angle – Selected angle/total number of angles. Sound – Selected sound mode.

Note:

If any button is not pressed for a few seconds, the on- screen display disappears.

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see the pages 19 to 22.

To display and exit the Menu:

Press SETUP to display the menu. A second press of SETUP will take you back to initial screen.

To go to the next level:

Press B on the Remote Control.

To go back to the previous level:

Press b on the Remote Control.

GENERAL OPERATION

1.Press SETUP. The Setup menu appears.

2.Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).

3.Use v / V to select the second desired option and then press B to move to the third level.

4.Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps.

5.Press SETUP or PLAY to exit the Setup menu.

Installation and Setup

19