Dimplex BF45DXP To access the light bulb area, Tool Requirements Phillips, Light Bulb Replacement

Maintenance
WARNING: Disconnect all	rating. Example: GE 60BC or
power coming to fireplace at main	Philips 60CTC.
service panel before attempting	DO NOT EXCEED 60 WATTS
maintenance or cleaning to	PER BULB.
reduce risk of fire, shock or		CAUTION: When handling log
damage to persons.	only apply force to the ember bed
CAUTION: Allow at least 5	section not directly to the logs.
minutes for light bulbs to cool off	To access the light bulb area
before touching bulbs to avoid ac-	1. Open steel curtain (remove
cidental burning of skin.
		glass doors if applicable).
Tool Requirements: Phillips
	2. Remove two screws on log
screwdriver
		bracket and set aside
Light Bulb Replacement:
		(Figure 2)
Light bulbs need to be replaced	3.	Pull front edge of plastic
when you notice a dark section
		ember bed or plastic grate
of the flame or when the clarity
		up and forward until rear
and detail of the log exterior
		tab releases from the ledge
disappears. There are four bulbs
		located at the bottom of the
under the log set which generate
		mirror (Figure 3).
the flames and embers.
	! Note: Log set fits tightly
Helpful Hints: It is a good idea to
	into firebox, some force may be
replace all light bulbs at one time
	necessary to remove.
if they are close to the end of their
rated life. Group replacement will	Figure 2
reduce the number of times you
need to open the unit to replace
light bulbs. Long life bulbs are
recommended to reduce the
frequency of bulb changes.
Light Bulb Requirements:
Quantity of 4 clear chandelier or
candelabra bulbs with an E-12
(small) socket base, 60 Watt		Screws
8		www.dimplex.com