Playing a Disc

Microboards CopyWriter Live

If your audio source volume is too low, the meter may show little or no activity. In that case, you should increase your input volume by pressing the Vol Up button. If your audio source volume is too high, the meter will indicate this by displaying an asterisk ( * ) as the right bar symbol, and the input volume should be reduced by pressing the Vol Down button.

Once you have your input volume set for your particular source, you are ready to record.

3.Start playing your source. If you are recording a live session, wait for the program to begin.

4.Press Record on the CopyWriter Live. This will start the recording. If your recording is longer than 1 CD, it will span to the second disc. The second CD will start to record up to 30 seconds before the first CD ends, so this amount of time will be recorded on both discs. Once the second disc is full, it will span back to the first CD, assuming you have a blank disc in the drive.

5.Recording volume from the input can be changed during recording by using the Vol Up and Vol Down buttons.

6.Press the Record button to start creating your next track immediately. You can have up to 99 tracks on a single CD.

7.Pressing Disc Change during the recording process will switch the recording from the original drive to the other drive, provided that it contains a blank disc. The disc in the original drive will be closed automatically.

8.Press the Pause button to pause the recording process. Press Record to begin recording again to a new track. Note that you cannot start the next track until the last track information has been completed, during which time the display will read Close Track. Recording can begin again once that message clears.

While paused, the input selection can be changed.

9.Press and hold the STOP button for 2 seconds while recording live to finalize the disc. The disc MUST be finalized in order to play the CD in any other system. If the Pause button was used to end the last recorded track, the disc has not been finalized and you will need to do so from the CD Tools menu before the disc will be playable (see pg 11, CD Tools: Close Disc).

1.Confirm you have your Audio Out connected to a playback device (Audio Receiver, etc.) or have headphones connected to the front panel.

2.Place the disc you wish to play back into either of the CD-R/W drives.

3.Press the Play button on the front panel.

4.Use the playback buttons on the front panel to control playback. If using headphones, adjust the volume using the knob next to the headphone jack

5.Play mode can be selected as follows by pressing the PLAY MODE button:

A.Normal – no Play Mode displayed. Plays audio tracks sequentially and stops when the disc ends.

B.Random – display shows RDM. The audio tracks are played in a random order.

C.Repeat CD 1 – display shows REP1. This mode will repeat the entire CD in the selected drive.

D.Repeat CD 2 – display shows REP2. This mode will repeat the CD’s in both drives in sequence, starting with the selected drive.

E.Repeat Track – display shows REPT. This mode will repeat play the current track.

CWL-6200 specifications

The LG Electronics CWL-6200 is a cutting-edge air conditioning unit that boasts a range of features designed to enhance comfort and energy efficiency in both residential and commercial environments. With its sleek design and state-of-the-art technologies, the CWL-6200 has become a popular choice for those seeking reliable climate control.

One of the standout features of the CWL-6200 is its advanced inverter technology. This system allows the air conditioner to adjust its cooling capacity based on the demand, resulting in significant energy savings. Traditional air conditioning units cycle on and off, which can lead to energy waste and temperature fluctuations. In contrast, the inverter technology ensures a consistent climate by running at varying speeds, minimizing energy consumption without sacrificing performance.

The CWL-6200 also incorporates a dual filtration system that enhances indoor air quality. The first layer captures larger particles, while the second layer, equipped with a HEPA filter, effectively traps finer particulate matter such as allergens and pollutants. This results in cleaner air being circulated throughout the space, making it an ideal choice for allergy sufferers or those with respiratory issues.

Another notable characteristic of the CWL-6200 is its silent operation. With reduced noise levels, it is perfect for bedrooms, offices, and other quiet spaces. This is achieved through the incorporation of advanced acoustic insulation and a specially designed fan that minimizes operational sounds.

In addition to its powerful cooling capabilities, the CWL-6200 features a range of smart functionalities. With Wi-Fi connectivity, users can control the air conditioning unit remotely via a smartphone app. This feature enables programmable schedules, real-time monitoring, and energy consumption tracking. By leveraging smart technology, users can optimize their air conditioning usage for greater convenience and efficiency.

The CWL-6200 also supports multiple cooling modes, including energy-saving and turbo modes, allowing users to customize their experience based on current needs. The unit's eco-friendly refrigerant ensures compliance with global environmental standards, making it a sustainable choice for conscientious consumers.

In summary, the LG Electronics CWL-6200 stands out for its inverter technology, dual filtration system, quiet operation, smart functionalities, and eco-friendly design. This air conditioning unit balances efficiency, comfort, and advanced features, making it a top contender in the market for those looking to improve their indoor environment.