FireplaceXtrordinair 44-Elite owner manual 2Operation, Selecting Wood

1 2Operation

Selecting Wood

Dry Wood is Key	Wet	Dry
	Wood	Wood

Leads

To

Dry wood burns hot, emits less smoke and creates less creosote.

Less

Heat

Leads

To

More Smoke

and Creostoe

Leads

To

More

Heat

Leads

To

Less Smoke

and Creostoe

Testing Wood Moisture

Wood cut, split and stored in a dry area will be fully dry within a year. This insures dry wood. If purchasing wood for immediate use, test the wood with a moisture meter. Some experienced wood burners can measure wood moisture by knocking pieces together and listening for a clear "knock" and not a "thud".

Why Dry Wood is Key

Wet wood, when burned, must release water stored within the wood. This cools the fire, creates creosote, and hampers a complete burn. Ask any experienced wood burner and he or she will agree: dry wood is crucial to good performance.

Wood Cutting and Storage

Cut wood to length and chop into quarters.

Store the wood off the ground in a
covered area. Allow for airflow	Air Flow
around the wood to dry the wood.

Air Flow

Air Flow

Don't Burn Treated Wood, Wax Logs, Coal, Garbage, Etc.

This fireplace has a catalytic combustor (see page 9) designed specifically to work with emissions from cord wood. Other fuels may clog or contaminate the combustor, leading to a drastic loss in heat output, increased emissions, and damage to the combustor.

In addition, fuel other than cord wood may burn excessively hot, leading to a serious fire hazard.

Travis Industries 9 3 5 0 8 0 9 4 2 2 0 6 0 2