Waterford Appliances LEPRECHAUN 90 O.S.A Chimneys, Chimney Types USA only, Chimney Connectors

Page 6

4.All clearances shall be measured from the outer surface of the combustible material to the nearest point on the surface of the Leprechaun 90 O.S.A., disregarding any intervening protection applied to the com- bustible material.

When using a manufactured wall shield system observe local building codes and by-laws.

CHIMNEYS

Consult the LOCAL BUILDING CODE in all cases as to the particular requirements concerning the installation of SOLID FUEL TYPE ROOM HEATERS. This Leprechaun 90 O.S.A. WOOD BURNING STOVE is intended to be installed in accordance with National Fire Protection Associations Standard for Chimneys, Fireplaces and Vents. NFPA 211-1977.

The chimney must have a CROSS SECTIONAL AREA of at least 193.5 sq. cm. (30 sq. inches). It is best connected to a chimney of the same size, as connection to a larger size may result in somewhat less draught.

The Leprechaun 90 O.S.A. is a Radiant Room Heater and must be connected to a chimney of the proper size and type, capable of providing an ade- quate continuous draught of 0.06wg minimum. It is best to connect to a chimney of the same size as the stove spigot. DO NOT CONNECT TO A CHIMNEY SERVING ANOTHER APPLIANCE.

Minimum chimney height is 14’ 10” (4.5m) from floor on which stove is installed. An existing masonry chimney should be inspected, and if necessary, repaired by a competent mason or relined, using an approved relining system. The stove must be connected to a chimney with a minimum continuous draught of 0.06”wg. Poor draught conditions will result in poor performance.

Note: Connection to type “B” Gas Vents, approved for connection to a certain gas burning appliance will only result in a fire.

CHIMNEY TYPES - USA ONLY

The stove must be connected to a UL 103 Listed residential Type HT and Building Heating, Appliance chimney installed in accordance with the manufac- turers instructions or a masonry chimney constructed in accordance with NFPA 211 Chimney vents and Solid Fuel Burning Appliances.

CHIMNEY TYPES - CANADA ONLY

The stove must be connected to an Underwriters Laboratories of Canada labelled Factory Built 650oC

Chimney, installed in accordance with the manufac- turers instructions or a lined masonry chimney acceptable to the authority having jurisdiction.

CHIMNEY CONNECTORS

THE CHIMNEY CONNECTOR is a smokepipe used to connect the Leprechaun 90 O.S.A. Stove to the approved chimney described above. The CHIMNEY CONNECTOR must be made of CORROSION RESISTANT STEEL 24 gauge or heavier (“black” or “blued”, or equivalent treated steel).

Be sure too fasten the chimney connectors together and also to the flue outlet of the stove through the holes provided. Use at least two screws for each joint. Be sure the joints are tight and fully secured.

Chimney connectors shall not pass through an attic, or roof space, closet or similar concealed space, or a floor or ceiling. Where passage through a wall, or partition of combustible construction is desired, the installation shall conform to CAN/CSA -B 365, Installation code for Solid Fuel Burning Appliances and Equipment.

Connectors should maintain a pitch or rise of at least 1/4” (6mm) to the foot from the stove to the chimney. It should be installed so as to avoid sharp turns or other construction features that would create exces- sive resistance to the flow of flue gases. It should be securely supported with joints fastened with sheet- metal screws, rivets, or other approved means. The entire length of a connector should be readily acces- sible for inspection, cleaning and replacement.

The connector may pass through walls or partitions constructed of combustible materials provided the connector is either listed for wall pass-through or is routed through a device listed for a wall pass- through and is installed in accordance with the con- ditions of the listing.

Any unexposed metal that is used as part of a wall pass-through system and is exposed to flue gases shall be constructed of stainless steel or other equiv- alent material that will resist corrosion, softening or cracking from flue gas at temperatures up to 982oC.

CONNECTING TO MASONRY CHIMNEY

The connector to a masonry chimney must extend through the wall to the liner face or liner but not beyond, and must be firmly cemented to masonry.

The connector may pass through walls or partitions constructed of combustible material to a masonry chimney provided the connector system selected is installed in accordance with the proper clearances and conditions (See figures A,B,C,D page 8 & 9).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Safety Notice Leprechaun 90 O.S.A Woodburning StoveDamper Handle Assembly PRE-INSTALLATION AssemblyHeat Shield Assembly TOP Flue ExitFloor Protection Rear ExitFit the heat shield as follows LocationMobile Home Installation Outside AIR ConnectionWall Protectors Chimneys Chimney ConnectorsConnecting to Masonry Chimney Chimney Types USA onlyLeprechaun 90 O.S.A Wood Burning StoveExploded View Thimbles Length shall not penetrate the chimney linerMasonry Fire Place Ventilation & Combustion AIR RequirementsSpillage Test LightingHow to Replace Primary AIR SettingsHow to Clean Door AssemblyFire Safety Event of a Chimney FireFloor Protection

LEPRECHAUN 90 O.S.A specifications

The Waterford Appliances LEPRECHAUN 90 O.S.A is a remarkable addition to the world of cooking appliances, renowned for its blend of traditional craftsmanship and modern technology. This professional-grade range cooker is designed for home chefs who seek both performance and aesthetics in their kitchen. At the heart of the LEPRECHAUN 90 O.S.A is a commitment to delivering exceptional cooking results, supported by a suite of impressive features and innovations.

One of the standout aspects of the LEPRECHAUN 90 is its powerful dual-fuel cooking system, which combines the precision of gas burners with the consistency of an electric oven. This dual-fuel configuration allows chefs to achieve precise temperature control and versatile cooking options. With five gas burners of varying sizes, including a high-output burner for rapid boiling and a gentle simmer burner for delicate sauces, the range is equipped to handle any culinary challenge.

The oven section of the LEPRECHAUN 90 O.S.A features a spacious main cavity that can accommodate large dishes, making it perfect for family gatherings or entertaining guests. It boasts multiple cooking functions, including conventional, fan-assisted, and grilling options, ensuring uniform heating and optimal cooking results. Additionally, the oven is equipped with advanced insulation technology, which promotes efficiency and helps maintain steady cooking temperatures while reducing energy consumption.

An integrated multifunctional grill adds to the versatility of this appliance, allowing users to prepare a wide variety of dishes from succulent grilled meats to deliciously crisp vegetables. The grill’s adjustable heat settings provide both searing and gentle cooking, catering to a broad spectrum of recipes.

Another notable feature is the integrated timer and digital display, which make it easy to monitor cooking times and temperatures. This modern touch complements the classic design of the LEPRECHAUN 90 O.S.A, featuring elegant, sturdy construction available in a variety of finishes to match any kitchen decor.

Safety is paramount, and Waterford Appliances has incorporated child safety locks on the oven doors and burners. The appliance also features a flame failure device that automatically cuts off the gas supply in the event of a flame extinguish, ensuring peace of mind while cooking.

In conclusion, the Waterford Appliances LEPRECHAUN 90 O.S.A beautifully combines style, functionality, and technology, making it an essential appliance for any serious home cook. With its array of features, it is designed to elevate the cooking experience, turning everyday meals into extraordinary culinary creations.
Top Page Image Contents