Regency Regatta owner manual Assembly Instructions DOWNROD, CANOPY, and Collar Cover

Page 6

ASSEMBLY INSTRUCTIONS: DOWNROD, CANOPY, AND COLLAR COVER

1.Carefully support fan housing (motor) in its styrofoam packing with the mounting collar (where the wires come out) facing upward.

2.Remove ball from downrod by loosening set screw in the side of the ball. Slide ball down and remove ball pin; remove ball. The 6˝ downrod is recommended (if clearance above floor allows) to provide greater air flow, since more space will be available above the blades for supply air.

3.Feed the wires from top of fan through the end of the downrod you have selected, and set end of downrod into mounting collar so the hole in the downrod lines up with the hole in the side of the mounting collar.

4.Insert downrod pin through holes in mounting collar and downrod; slip cotter pin through small hole in end of downrod pin to hold downrod pin in place.

5.Tighten security screws against downrod using a large flat blade screwdriver to ensure a tight fit against downrod. Then tighten lock nuts against mounting collar.

NOTE: Fan has 6 feet of hook-up wire in case you are using a long extension downrod. Wires can be cut so only 8 inches or so extend beyond the top of the downrod to make the electrical connections easier and safer.

6.Feed wires through and slide collar cover down the downrod to top of fan.

7.Feed wires through canopy and slide canopy over downrod to lay on top of collar cover. It will be attached to ceiling later.

8.Feed wires through ball and slide ball over downrod, past hole in the top end of downrod. Insert ball pin (removed in Step 2), slide ball up and tighten set screw to secure ball in place.

9.Install 4 candelabra base bulbs (E12, 25w max) in sockets.

Hook-up Wires (3)

Ground

Wire

Ball

Canopy

Downrod

 

Collar Cover

Mounting Collar

Security Screws

 

Downrod

Cotter Pin

Pin

 

E12 bulbs

Fan

Housing

5

Image 6
Contents Regatta General Installation & Operation Instructions Important SafeguardsImportant Safety Precautions Tools and Materials RequiredUnpacking Your FAN 11 12 1415Installing the Mounting Bracket PreparationAssembly Instructions DOWNROD, CANOPY, and Collar Cover Installing the FAN Electrical Connections GRNBlade Attachment Installation of Removable Switch Housing Transmitter Remote Control Optional Mounting HUB AntennaCare and Cleaning Troubleshooting in Case of DifficultyOperation Thank YOU for Purchasing a Regency Ceiling FAN

Regatta specifications

The Regency Regatta is a premier annual event that showcases the passion for rowing and sailing in a picturesque setting. Hosted in a vibrant locale, it draws participants and spectators from various backgrounds, all united by their love for water sports. This regatta symbolizes not just competition but also camaraderie and a celebration of maritime culture.

One of the main features of the Regency Regatta is its diverse range of events, accommodating various categories of boats and skill levels. From elite rowing teams to novice sailors, the regatta embraces inclusivity, encouraging participation from individuals of all ages. The event typically spans several days, with races scheduled for different classes, allowing for a full display of athletic prowess and strategy on the water.

Safety and technology play vital roles in the modern iteration of the Regency Regatta. Advanced timing systems and GPS tracking ensure accurate race results and provide spectators with real-time updates on each team's performance. Drones equipped with high-definition cameras capture stunning aerial views of the races, enhancing the viewing experience on-site and for virtual audiences. These technologies not only improve the efficiency of the event but also add an innovative twist to traditional racing.

Another characteristic that sets the Regency Regatta apart is its commitment to sustainability. Organizers implement environmentally friendly practices, such as waste reduction initiatives and promoting the use of eco-friendly materials for event facilities. Additionally, many participating teams are encouraged to adopt green technologies in their boats, emphasizing the importance of preserving aquatic environments.

The spirit of community is alive at the Regency Regatta, where local vendors often set up stalls offering delicious food and beverages. This creates a festival atmosphere where attendees can mingle and relax between races, fostering connections and friendships.

In conclusion, the Regency Regatta is more than just a series of races; it is a celebration of athleticism, technology, and community. With its broad range of events, commitment to safety, and focus on environmental responsibility, it continues to be a beloved tradition for rowers, sailors, and fans alike. The regatta exemplifies the joys of competition and the beauty of aquatic sports, making it a highlight on the annual sporting calendar.