Regency U32-LP5, U32-NG5 dimensions Combustible Mantels, Clearances to Combustibles, 126

Gas Inserts

U32 Regency Gas Insert

Clearances

Unless otherwise stated the clearances listed below are Minimum distances to combustible materials. Please Note: A major cause of chimney related fires is due to a failure to maintain required clearances (air space) to combustible materials. It is of the greatest importance that this fireplace and vent system be installed only in accordance with these instructions.

Clearances to Combustibles

Dimension	Description	U32
A	From Unit to Sides	10” (254mm)
B	From Unit to Ceiling	47.5” (1207mm)
C	From Unit to Mantel	see diagram 2 & 3
D	From Standard Surround to Sides	4” (102mm)
E	From Standard Surround to Ceiling	41.5” (1054mm)
		also see diagram 2 & 3
G	Maximum Mantel Depth	12” (305mm)
		see diagram 2
H	Minimum Alcove Width	48” (1219mm)
I	Maximum Alcove Depth	36” (914mm)

*No Hearth Required

Gas Inserts

Combustible Mantels

Because of the extreme heat this fireplace emits, the mantel clearances are critical. Combustible mantel clearances from top of the louvers are shown in the diagram below. Mantel may be installed anywhere in the shaded area or higher.

C

A

D

E

G

H

B

I

Note: A non-combustible mantel may be installed at a lower height.

Note: Ensure the paint that is used on the mantel and the facing is “heat resistant” or the paint may discolour.

	12" Max.
Mantle	G
	C
Faceplate	Combustible
	Flooring
	Flush
	with
	Floor

126 August 2008 Product Specifications Book