Matsushita MPE-33R warranty Remote Control Operation

Page 7

REMOTE CONTROL OPERATION:

REMOTE CONTROL

A

POWER

 

B

 

ON/OFF

C

D

DISPLAY

ON/OFF

E

Dimmer

Brighter

FEMBERS

HEATER ON/OFF

G

 

TEMP. CONTROL

I

 

HIGH

MED. LOW

 

H

 

FLAME

 

 

 

 

 

LOWER

HIGHER

 

J

 

 

 

K

 

 

 

 

 

 

 

 

 

 

•When using the remote control, the power on/off switch inside the body and the wall switch (optional kit) must be on the OFF position.

Figure 6

CAUTIONS

•Do Not Use Old Batteries With New Ones.

•Do Not Use Batteries Other That The Type Specified (2 Ea. AA).

•Ensure Batteries Are Correctly Installed In Remote Control.

The Merit Plus Electric Fireplace is provided with an Infrared light Remote Control. All functions of the fireplace can be con- trolled through the remote control. Note: The Effective range of the remote control is up to approximately 26 feet (8 meters).

The functions identified on the remote (see Figure 6) are as follows:

A.POWER BUTTON

Press once to turn on power to fireplace.

B.INDICATING LIGHT Illuminates when signal is sent.

C.LIGHT BUTTON

On/off switch for flame and ember light.

D.LIGHT ADJUSTING BUTTON (DIM) Reduces brightness of embers.

E.LIGHT ADJUSTING BUTTON (BRIGHTEN) Increases brightness of embers.

F.HEATER ON/OFF

This button will turn the heater ON and OFF

independent of the main button.

G.TEMPERATURE ADJUSTMENT BUTTON (HIGH)

Highest heat output, up to 86° F.

H.TEMPERATURE ADJUSTMENT BUTTON (MED.)

Medium heat output, up to 75° F.

I. TEMPERATURE ADJUSTMENT BUTTON (LOW)

Lowest heat output, up to 64° F.

J. FLAME ADJUSTING BUTTON (LOWER) Reduces flame intensity.

K. FLAME ADJUSTING BUTTON (HIGHER) Increases flame intensity.

Remote Control Operation Steps:

1.To control the electric fireplace by remote control, the main power on/off switch should be in the off position. This switch is located on the front left floor of firebox (see Figures 4 & 5).

2.When operating the remote control, it must be pointed at the logs inside the electric fireplace and a beep must be heard each time you press a function button. The beep lets you know the remote control is operating the function button you are pressing.

3.Remote On & Off Button - The button on the top left (see A) is the on/off power button. When pressing this button you will hear a beep, this will activates the power to the fireplace. You must then press the display button (B) to activate the lights.

Note: If the flame does not come on immedi- ately, adjust brightness and intensity (buttons E & K).

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

4.To increase the brightness, press and release the light brighten button (see E). Each time you press this button you will hear a beep, and the brightness will increase by a small amount, until the maximum brightness is achieved. To decrease the brightness, press and release the light dimming button (see D). Each time you press this button you will hear a beep, and the brightness will decrease by a small amount, until the minimum brightness is achieved.

5.HeaterButton,Toactivatetheheater,pressthe heater button (see F), then press HI (G),

MED (H), or LO (I). The heater is preset to the following temperatures:

•HIGH will shut off when room reaches approximately 86° F (30° C).

•MED. will shut off when room reaches approximately 75° F (24° C).

•LO. (Low) will shut of when room reaches approximately 64° F (18° C).

6.Flame Button - Press the Flame Adjusting Buttons to achieve a higher or lower flame intensity (see J & K).

7.To Increase Flame Brightness press and release the (K) button. Each time you press this button you will hear a beep and the brightness of the flame will increase slightly, until the maximum setting is reached. To Decrease Flame Brightness press and release the (J) button. Each time you press this button you will hear a beep and the brightness of the flame will decrease slightly, until the minimum setting is reached.

8.To turn the electric fireplace off, Press the off button once (A), when you hear the beep the fireplace will be completely off. When you restart your fireplace with the remote control, all settings will restart at the high settings pro- grammed at the factory. You may also simply press the (B) button to turn off the flame and still use the heater.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Report # C1482763 Electric Fireplace 850,032M REV. a 02/2006Congratulations Locating Your Merit Plus Electric Fireplace Power Supply Wire SpecificationsFor 120 V W/OPTIONAL Power Cord General InformationRight Side Framing SpecificationsFireplace Specifications Left SideElectrical Connections PRE-INSTALLATIONDetailed Installation Steps Minimum Clearances to COMBUS- TiblesManual Control Panel Operation Final FinishingBREAK-IN Period Manual Control PanelRemote Control Operation HEATER/BLOWER Replacement PROCE- Dure MaintenanceBrick Panel Removal Procedure Ember Bed Bulb Replacement ProcedureReplacing Light Bulbs Acess bulbs as follows120 V 1600W Wiring Diagram 120 VoltWiring 120 Volt Ground240 V 3000W Wiring Diagram 240 VoltWiring 240 Volt Ground Main PowerInside Outside Wall Thermostat & Wall Switch Wiring DiagramsInside Outside Optional kits, seeWhite Left Side Fireplace Wall Thermostat Wiring 24 VACWall Thermostat Black WhiteWall Switch Wiring 24 VAC Wire the wall switch prior to installing the fireplaceRed WHO Performs Corrective Action Causes TroubleshootingCAT. no Replacement PartsDescription MPE-33R712 Replacement Parts Component DiagramsAccessory Components Page 850,032M REV. a 02/2006

MPE-33R specifications

The Matsushita MPE-33R is a remarkable addition to the world of electronic devices, particularly known for its innovative features and exceptional performance. This high-performance product embodies the core principles of reliability, efficiency, and cutting-edge technology that Matsushita has championed for decades.

One of the standout characteristics of the MPE-33R is its advanced audio-visual capabilities. Equipped with a high-definition display, this device provides crystal-clear visuals that enhance user experience whether for entertainment or professional use. The screen supports a wide spectrum of colors, ensuring vibrant and lifelike images that captivate the audience.

In terms of audio, the MPE-33R integrates state-of-the-art sound technologies. With its powerful built-in speakers and support for various audio formats, users can enjoy immersive sound quality that complements its visual prowess. This makes it ideal for both movie enthusiasts and music lovers alike, providing an all-encompassing sensory experience.

Connectivity is another significant strength of the Matsushita MPE-33R. It boasts a range of connectivity options, including Wi-Fi and Bluetooth capabilities, which allow users to effortlessly connect to the internet or pair the device with other smart gadgets. This feature enhances its versatility, making it a hub for all digital interactions.

Additionally, the MPE-33R is designed with user-friendliness in mind. Its intuitive interface and customizable settings ensure that navigating through various applications and features is seamless. This attention to user experience is further reflected in its long-lasting battery life, enabling extended usage without frequent recharges, which is a critical factor for users on the go.

Quality and durability are hallmarks of the Matsushita brand, and the MPE-33R is no exception. It is constructed with high-quality materials that ensure durability, making it capable of withstanding the rigors of daily use while maintaining aesthetic appeal.

In conclusion, the Matsushita MPE-33R is a true embodiment of innovative technology combined with practical usability. Its exceptional audio-visual features, strong connectivity options, user-centric design, and robust build quality make it a standout choice for a wide range of users. Whether for personal entertainment or professional applications, the MPE-33R delivers outstanding performance and reliability, solidifying Matsushita’s reputation as a leader in electronic innovation.
Top Page Image Contents