Lopi Plated Surfaces, Bostonian 564 Wilmington Face, Installation - 564 SS continued, Black

Page 4
Plated Surfaces

Bostonian (564) Wilmington Face

Black 95400186

Nickel 95400187

Installation – 564 SS (continued)

4 Install the face following the directions below.

Optional Facing (and/or hearth) --

See the installation manual for details.

The face is secured to the fireplace with four screws. Two c of the screws are fastened to the upper brackets with

press nuts. The lower screws are included with the face.

Attach the upper brackets a to the face with the

included nuts. The upper bracket consists of two pieces - note orientation.

Slide the face into place. The b tabs on the upper brackets insert

into the slots on the fireplace brackets, holding the face in place while the screws are tightened.

Plated Surfaces

Use denatured alcohol and a soft cloth to clean plated surfaces. Marks

left on the surface may damage the face.

Denatured

Alcohol

Soft Cloth

Page 4 of 6

8/17/07

© Travis Industries, Inc.

Image 4
Contents Installation Details - 564 SS Bostonian 564 Wilmington FaceCompatibility Packing ListInstallation - 564 SS Bostonian 564 Wilmington FaceBlack Travis Industries, IncInstallation - 564 SS continued Bostonian 564 Wilmington FaceBlack Travis Industries, IncPlated Surfaces Installation - 564 SS continuedBostonian 564 Wilmington Face left on the surface may damage the faceInstallation - 564 Electric Bostonian 564 Wilmington FaceRemove the stock upper heat shield BlackBostonian 564 Wilmington Face