Omnitron Systems Technology A10 manual

Combustible Wall Chimney Connector Pass-Throughs.

Method A. 12” (304.8 mm) Clearance to Combustible Wall Member: Using a minimum thickness 3.5” (89 mm) brick and a 5/8” (15.9 mm) minimum wall thickness clay liner, construct a wall pass-through. The clay liner must conform to ASTM C315 (Standard Specification for Clay Fire Linings) or its equivalent. Keep a minimum of 12” (304.8 mm) of brick masonry between the clay liner and wall combustibles. The clay liner shall run from the brick masonry outer surface to the inner surface of the chimney flue liner but not past the inner surface. Firmly grout or cement the clay liner in place to the chimney flue liner.

Method B. 9” (228.6 mm) Clearance to Combustible Wall Member: Using a 6” (152.4 mm) inside diameter, listed factory- built Solid-Pak chimney section with insulation of 1” (25.4 mm) or more, build a wall pass-through with a minimum 9” (228.6

mm)air space between the outer wall of the chimney length and wall combustibles. Use sheet metal supports fastened securely to wall surfaces on all sides, to maintain the 9” (228.6

mm)air space. When fastening supports to chimney length, do not penetrate the chimney liner (the inside wall of the Solid- Pak chimney). The inner end of the Solid-Pak chimney section shall be flush with the inside of the masonry chimney flue, and sealed with a non-water soluble refractory cement. Use this cement to also seal to the brick masonry penetration.

Method C. 6” (152.4 mm) Clearance to Combustible Wall Member: Starting with a minimum 24 gage (.024” [.61 mm]) 6” (152.4 mm) metal chimney connector, and a minimum 24 gage ventilated wall thimble which has two air channels of 1” (25.4 mm) each, construct a wall pass-through. There shall be a minimum 6” (152.4) mm separation area containing fiberglass insulation, from the outer surface of the wall thimble to wall combustibles. Support the wall thimble, and cover its opening with a 24-gage minimum sheet metal support. Maintain the 6” (152.4 mm) space. There should also be a support sized to fit and hold the metal chimney connector. See that the supports are fastened securely to wall surfaces on all sides. Make sure fasteners used to secure the metal chimney connector do not penetrate chimney flue liner.

Method D. 2” (50.8 mm) Clearance to Combustible Wall Member: Start with a solid-pak listed factory built chimney section at least 12” (304 mm) long, with insulation of 1” (25.4 mm) or more, and an inside diameter of 8” (2 inches [51 mm] larger than the 6” [152.4 mm] chimney connector). Use this as a pass-through for a minimum 24-gage single wall steel chimney connector. Keep solid-pak section concentric with and spaced 1” (25.4 mm) off the chimney connector by way of sheet metal support plates at both ends of chimney section. Cover opening with and support chimney section on both sides with 24 gage minimum sheet metal supports. See that the supports are fastened securely to wall surfaces on all sides. Make sure fasteners used to secure chimney flue liner.

A10 specifications

Omnitron Systems Technology A10 is a leading-edge networking solution designed to enhance the efficiency, performance, and reliability of network infrastructures. The A10 series is particularly well-regarded for its versatility and ability to support a wide range of applications across various industries, including enterprise networks, service providers, and data centers.

One of the standout features of the A10 is its support for high-speed data transfer. It typically offers speeds up to 10 Gigabits per second, enabling organizations to handle data-intensive applications without compromising performance. The device is built to accommodate the increasing demand for bandwidth, particularly as businesses adopt cloud-based services and big data analytics.

The A10 often includes advanced Layer 2 and Layer 3 capabilities, ensuring ease of integration into existing networks. It supports various protocols, including Ethernet, VLAN tagging, and IP routing, making it an ideal choice for organizations looking to streamline their networking setups. This flexibility aids in reducing overhead costs while enabling a more agile response to changing business needs.

Security is another critical characteristic of the A10 series. It incorporates robust security features to protect against potential threats and ensure data integrity. Enhanced firewall capabilities and encryption protocols help safeguard sensitive information, making it suitable for environments where data protection is paramount.

The technology behind the A10 is meticulously designed for reliability. Redundant power supplies and hot-swappable components minimize downtime, allowing organizations to maintain operational continuity. Additionally, the A10's monitoring and management tools provide real-time insights into network performance, enabling proactive measures to address potential issues before they escalate.

Furthermore, the A10 supports various deployment methods, including on-premises, virtualized environments, and cloud-based setups. This adaptability allows businesses to tailor their network configurations according to their unique requirements.

In conclusion, Omnitron Systems Technology A10 stands out for its high-speed capabilities, versatile integration options, strong security features, and reliable performance. With its ability to effectively support diverse networking applications, the A10 is an invaluable asset for organizations looking to optimize their network infrastructures and stay ahead in the digital landscape.