Lopi Leyden Wood Stove owner manual Stove Installation for qualified installers only

16 Stove Installation (for qualified installers only)

Standard Ceiling with a Factory Built Chimney

Chimney Cap (See the section "Chimney

Termination Requirements" for more

Chimney Sections		}
Insulation	}
Follow the chimney
manufacturer's instructions
and clearances for floor
penetrations. A ceiling
support is required, an attic
insulation shield is required
where insulation is present.
Chimney Connector Sections

Floor Protection

(See the section "Floor Protection Requirements" for more details)

Follow the chimney manufacturer's instructions and clearances for roof penetrations. A storm collar and flashing are required (some require a radiation shield).

Minimum Air Space to Combustibles (See Chimney Manufacturer's Instructions - usually 2")

Minimum 15'

Maximum 33'

Stove Clearances (See the section "Stove Placement Requirements" for more details)

Figure 13

Cathedral Ceiling with a Factory Built Chimney

Chimney Cap
(See the section "Chimney
Termination Requirements"		}
for more details)
			Follow the chimney
Chimney Sections			manufacturer's instructions
			and clearances for roof
			penetrations. A storm
Minimum Air Space to			collar, flashing, and
Combustibles (See Chimney			cathedral-style chimney
Manufacturer's Instructions -			support are required
usually 2")			(some require a radiation
			shield).
	Chimney		Minimum 15'
			Maximum 33'
	Connector
	Sections
Floor Protection			Stove Clearances
(See the section "Floor
			(See the section "Stove
Protection Requirements"
			Placement Requirements"
for more details)
			for more details)

Figure 14

© Travis Industries 100-01177 4060802