Lopi 864TRV 10Maintenance, Maintaining Your Fireplaces Appearance, Yearly Service Procedure

Page 10

10Maintenance

Maintaining Your Fireplace's Appearance

Fingerprints or other marks left on the optional plated surface may become etched in place if they are not wiped clean prior to turning the fireplace on. Clean the plated surface with denatured alcohol and a soft cloth (with the fireplace cool). Other cleaners may leave a film that may become etched into the surface.

Yearly Service Procedure

•Failure to inspect and maintain the fireplace may lead to improper combustion and a potentially dangerous situation. We recommend the following procedures be done by a qualified technician.

1.Check the pilot flame. It should touch approximately 3/8" of the top of the thermopile and touch the top of the thermocouple (see illustration below). If it does not, contact your dealer for service.

2.Shut off gas to the fireplace by turning the gas control knob to "OFF" (see step A under "Starting the Pilot" on page 7). Let the fireplace cool for 15 minutes. Remove the glass (see page 10).

3.Remove the log set (NOTE: the logs are very fragile - see page 15). If severely deteriorated, replace. Check the logs for sooting. A small amount of soot along the bottom of the logs is normal. If excessive sooting is found, the fireplace will require adjustment. Contact your dealer.

4.Inspect the burner and remove any debris.

•Make sure the burner is not warped, cracked, or damaged.

•Check the firebox and area around the pilot to make sure there is no warping or damage.

•If any problem is found, discontinue use and contact your dealer for service.

Check the walls and ceiling of the firebox for deterioration.

Before Disassembly - Check the pilot flame. It should touch the thermocouple and thermopile.

Thermopile

Pilot Hood

Thermocouple

Check the burner holes.

Make sure the burners are not warped or damaged.

5.Replace the log set. Clean and replace the glass (see Glass Cleaning on page 20). If the glass is damaged, replace. Make sure the gasket along the perimeter of the glass contacts the face of the firebox and forms an air-tight seal. If it does not, re-align or replace the gasket to insure an air-tight seal.

6.Inspect the area behind the access door. Clean if necessary. Check the gas control valve and the gas lines. If damage is found, discontinue use and contact your dealer for service. Clean the air channels, ducts, and blower (if applicable).

7.Start the pilot and turn on the main burner. The flames should be orange/yellow and not touch the top of the firebox. If the pilot or main burners do not burn correctly, contact your dealer for service. Monitor the blower operation.

8.Remove any debris or vegetation near the vent termination. Contact your dealer if any sooting or deterioration is found near the vent termination.

© Travis Industries

4050812

100-01168_001

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operation Maintenance 864TRV Fireplace2Introduction Installation WarningsIntroduction Important Information Heating Specifications Table of ContentsFeatures Introduction3Safety Precautions If YOU Smell GASDo not place anything inside Before You Begin 6OperationLocation of Controls Operation Starting The Pilot FlameStarting the Fireplace for the First Time Adjusting the Flame Height8Operation Turning the Fireplace On and OffNormal Operating Sounds Adjusting the Optional Blower SpeedOperation9 Normal Operating OdorsYearly Service Procedure 10MaintenanceMaintaining Your Fireplaces Appearance Maintenance11 Grill Installation and Removal12Maintenance Face Installation and RemovalMaintenance13 Glass Frame Removal and Installation14Maintenance Log Set Installation Maintenance15Rear Log Installation 16Maintenance Right Log InstallationMaintenance17 Left Log Installation18Maintenance Center Log InstallationMaintenance19 Ember Installation20Maintenance Glass CleaningMaintenance Troubleshooting TableWhat Turns the Main Burners On and Off 22MaintenanceHow this Fireplace Works What Prevents Gas BuildupReplacement Parts List Maintenance23Wiring Diagram Millivolt Wiring stock configurationLimited 7 Year Warranty Years 1 & 2 Coverage Parts & LaborAccessories Optional Equipment26Index Index

864TRV specifications

The Lopi 864TRV is a modern gas fireplace that combines advanced technology with stylish design, making it a popular choice for homeowners looking to enhance their living spaces. This model is designed for efficiency, warmth, and aesthetics, serving as an excellent focal point in any room.

One of the standout features of the Lopi 864TRV is its impressive heating capacity. With an output of up to 31,000 BTUs, this fireplace can quickly and effectively heat large areas, providing consistent warmth during the cold months. Its large viewing area, complemented by the clear ceramic glass, offers a stunning view of the flames, creating a cozy ambiance that enhances any environment.

The technology incorporated into the Lopi 864TRV significantly contributes to its efficiency. It utilizes a direct vent system, which allows for the safe expulsion of gases while drawing fresh air from outside for combustion. This feature ensures that the fireplace operates efficiently and safely, minimizing the impact on indoor air quality. The unit is also equipped with multiple burner options, including a traditional log set or contemporary stone features, allowing homeowners to customize the look and feel of their fireplace.

Energy efficiency is a critical consideration for modern gas fireplaces, and the Lopi 864TRV doesn't disappoint. It boasts an exceptional efficiency rating of over 80%, which means that most of the energy consumed goes directly into heating rather than being lost through exhaust. Additionally, the unit can be easily controlled using a remote or wall thermostat, providing convenience for users to adjust the heat settings as needed.

The design of the Lopi 864TRV is both versatile and stylish. It can be built into a wall or used as a freestanding unit, accommodating various home layouts. With customizable trim and finishing options, the fireplace can seamlessly blend into any décor, from contemporary to traditional interiors.

In conclusion, the Lopi 864TRV is a powerful and efficient gas fireplace that offers homeowners a stylish, customizable option for heating their spaces. With its advanced technologies, high thermal efficiency, and elegant design features, it represents a perfect blend of functionality and aesthetics for modern living.
Top Page Image Contents