Chimney Requirements, Drafting, Performance

Stove Installation (for qualified installers only)

Chimney Requirements

•DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.

•UL 103 HT Chimney must be used from the first ceiling or floor penetration to the chimney cap.

•Use 6" diameter type UL 103 HT chimney from one manufacturer (do not mix brands) or code approved masonry chimney with a flue liner.

•Chimney must be fastened to each adjoining section.

•Follow the chimney manufacturer's clearances and requirements.

•Use the chimney manufacturer's fire stops, attic guards, roof supports, and flashings when passing through a ceiling

•No more than 180o of elbows (two 90o elbows, or two 45o & one 90o elbow, etc.) may be used for the entire system (connector and chimney).

NOTE: Additional elbows may be allowed if draft is sufficient. Whenever elbows are used the draft is adversely affected. Additional chimney height may be required to boost draft

Chimney Cap (See the section "Chimney Termination Requirements" for more details)

Factory Built Chimney Sections

Floor Penetration Equipment (Attic Radiation Shield with Chimney Support)

Reduced Clearance Chimney}

Connector Sections

Floor

Protection

Minimum System 15'

} Maximum System 33' Roof Penetration Equipment (Roof

Radiation Shield, Flashing, Storm Collar)

Minimum Air Space to Combustibles (See Chimney Manufacturer's Instructions - usually 2")

Standard residential installations with reduced clearance connector may use the clearance determined by the manufacturer of the connector for the connector to wall clearance or the clearance listed in this manual.

Mobile home installations must use the the reduced clearance connector clearances listed in this manual under “Additional Requirements for Mobile Home Installations”.

Stove Clearance

(as outlined in this manual)

	Figure 5
Drafting	This appliance relies upon natural draft to operate. External forces, such as wind,
Performance	barometric pressure, topography, or factors of the home (negative pressure from exhaust
	fans, chimneys, air infiltration, etc.), may adversely affect draft. Travis Industries can not be
	responsible for external forces leading to less than optimal performance.

100-01179

4060926

1750 specifications

The Lopi 1750 is a highly regarded wood-burning stove known for its efficient heating capabilities, elegant design, and robust construction. It represents a perfect blend of modern technology and traditional craftsmanship, making it a favored choice for homeowners seeking an effective and aesthetically pleasing heating solution.

One of the standout features of the Lopi 1750 is its impressive heat output. With a maximum output of 75,000 BTUs, it can efficiently heat large spaces, making it ideal for both cozy cabins and spacious homes. The stove's large firebox can accommodate logs up to 18 inches long, providing long burn times that keep the warmth consistent throughout the day and night.

The Lopi 1750 employs advanced combustion technology that allows for a cleaner and more efficient burn. Its secondary combustion system re-burns flue gases, significantly reducing smoke emissions and enhancing fuel efficiency. This technology not only makes the stove environmentally friendly but also ensures that users get the most out of their firewood, saving both money and resources in the long run.

Another notable characteristic of the Lopi 1750 is its heavy-duty construction. Made from high-quality materials, the stove is designed to withstand high temperatures and daily use. Its cast iron door and large viewing window provide an inviting atmosphere, allowing users to enjoy the warm glow of the fire while being assured of the stove's durability.

Additionally, the Lopi 1750 features a versatile design that complements various home styles. Available in several finishes, including classic black and porcelain enamel, it can fit seamlessly into any décor. The stove is also equipped with a powerful convection blower that circulates warm air efficiently, enhancing room temperatures even further.

Users appreciate the easy-to-use ash pan, making the cleanup process straightforward. The Lopi 1750 also comes with a limited lifetime warranty, reflecting the manufacturer's commitment to quality and customer satisfaction.

For those seeking a reliable, efficient, and stylish wood-burning stove, the Lopi 1750 stands out as an exceptional option that combines modern technology with timeless design principles, making it a worthy investment for any home.