Regency Faceplate and Trim, I1100S Small Insert, H2100M, I2100M and I3100L Inserts, All units

Page 9

INSTALLATION

proper stainless steel unit available with the chimney liner.

6)Once the above items have been checked, slide your insert into position after first positioning the flue liner and offset if re- quired. (Re-install raincap at completion of installation).

FACEPLATE AND TRIM

Prior to sliding your insert into its final position and attaching the connector or liner pipe, the faceplate side panel plates must be installed as follows:

A) I1100S Small Insert

1)Fasten the faceplate mounting bracket to the side of the insert (one on each side) using the screws provided (2 screws per bracket). Diagram 1.

Diagram 1: I1100S

2)Assemble the faceplate sides and top with 4 screws. See Diagram 2.

Diagram 3: I1100S

B) H2100M, I2100M and I3100L Inserts

1)Slide the spring nuts (supplied) over the slots in the insert’s side convection panels (the spring nuts may need to be squeezed with a pair of pliers first, to help them stay in position).

2)Screw the side faceplate panels, (item A in diagram 4) one to each side.

3)Using the top panel (item B in the diagram) as a gauge, check that the side panels are within approximately 1/4" of the overall width. If the difference is greater

than this, use the supplied washers to attain the re-

quired width.

C) All units

The unit may now be slid into final position and attached to the connection system.

Once connection is made, the insulation strips should be installed between the insert face- plates and the fireplace face. The faceplate top may now be installed (with insulation strip behind) by aligning its brackets with the top flange on the side shields and the angle iron bar on the insert top. The faceplate trim may be installed to the edge of the faceplate at this time.

I1100S: Drill two 5/32" diameter holes through the trim and side panels and screw the trim to the panels using the gold plated screws provid- ed.

Note: It may be easier to install the insu- lation, faceplate top and faceplate trim with the unit pulled slightly away from the fireplace face. If this is done, be very careful not to disturb the connector when shift- ing the unit to its final position.

Now that your insert is installed, check once more that all the clearances from the unit to any combustible materials are correct as listed earlier.

Diagram 2: I1100S

Rear View

3)Attach the assembled faceplate to the face-

plate mounting brackets.

Diagram 4:

 

 

H2100M, I2100M

 

and I3100L

 

Faceplate

 

Assembly

Regency Insert & Hearth Heater

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Wood Regency Fireplace Product Table of Contents Contents here for your review InstallationEach Regency Hearth Heater and Large 106Chimney Specifications Before Installing Your InsertFireplace Specifications Installing Your InsertMasonry and Factory Built Fireplace Clearances Optional Flue Connector KITAdjacent Mantle Top Side Minimum Unit Side Wall Insert I2100MInstallation Into a Masonry Fireplace Flue Connector BracketInstallation Into a Factory Built Fireplace LEG Option on H2100 Hearth HeaterI1100S Small Insert Faceplate and TrimH2100M, I2100M and I3100L Inserts All unitsFAN/BLOWER Brick Flue Baffle & Secondary AIR Tube Installation Firebrick AssemblyFloor Protection Large Insert I3100LDoor Handle Draft ControlSmall Insert I1100S Hearth Heater H2100M Steel BaffleOperating Instructions Maintenance Parts Parts List I1100, I2100Faceplate I3100L Parts List H2100 Parts List I1100, I2100, I3100, H2100 Warranty Lifetime WarrantyConditions ExclusionsInstaller Please complete the following information

I2100M specifications

The Regency I2100M is a remarkable portable two-way radio communication device that caters to the needs of various users, ranging from outdoor enthusiasts to professionals in demanding workplaces. This radio exemplifies a blend of advanced technology, durability, and user-friendly design, ensuring effective communication in diverse environments.

One of the standout features of the Regency I2100M is its impressive range capability. With a robust transmission power of up to 5 watts, this device can communicate effectively over distances of several miles, making it perfect for activities such as hiking, camping, or coordinating events. Users can rely on the I2100M to maintain contact even in remote areas, where cellular signals may be weak or unavailable.

The I2100M is equipped with advanced digital signal processing technology, which enhances audio clarity and reduces background noise. This means users can enjoy clearer conversations, even in noisy or crowded settings. The device also supports multiple channels, allowing for smooth communication between different groups or teams without interference.

In terms of durability, the Regency I2100M is built to withstand the rigors of outdoor use. Its rugged design is resistant to water and dust, enabling it to perform reliably in harsh weather conditions. This makes it an ideal choice for users who spend extended periods in challenging environments.

The battery life of the I2100M is another commendable feature, designed to offer extended operational times. Users can enjoy hours of communication without the need for frequent recharging, thanks to its high-capacity battery. Additionally, the device supports quick charging, ensuring that it is ready for use when needed.

An ergonomic design enhances the usability of the I2100M. Controls are intuitively placed, ensuring users can easily access functions without taking their eyes off their surroundings. The device is lightweight, making it convenient to carry during outdoor adventures or while on the job.

In summary, the Regency I2100M stands out as a premier communication tool that combines advanced features, durability, and user comfort. Whether for outdoor activities or workplace coordination, the I2100M delivers reliable performance and enduring communication capabilities, making it a wise investment for anyone in need of a dependable two-way radio.
Top Page Image Contents