Weil-McLain GV-5 510-811-610, GV-6 510-811-615, GV-3 510-811-600

PROPANE CONVERSION IS EASIEST WHEN BOILER IS ON SKID.

1.REMOVE JACKET FRONT PANEL.

2.LOCATE EXISTING ORIFICE PLATE BETWEEN BLOWER HOUSING AND GAS/AIR MANIFOLD.

3.REMOVE FRONT 2 SCREWS HOLDING GAS/AIR MANI- FOLD AND ORIFICE PLATE TO BLOWER HOUSING. LOOSEN BACK 2 SCREWS.

4.PULL OUT EXISTING ORIFICE PLATE.

5.SLIDE IN NEW ORIFICE PLATE UNTIL FRONT SCREW HOLES LINE UP.

6.INSTALL FRONT 2 SCREWS.

7.TIGHTEN ALL 4 SCREWS EVENLY.

8.BEND DOWN FRONT LIP ON ORIFICE PLATE.

9.REPLACE JACKET FRONT PANEL.

10.AFFIX CONVERSION LABEL ON LEFT SIDE OF BOILER ABOVE GAS PIPING, ON TOP OF RIVETS.

11.SEE BOILER MANUAL PACKED WITH BOILER FOR GAS LEAK TEST AND START-UP/CHECK-OUT PROCEDURES.

BLOWER

HOUSING

GAS/AIR

ORIFICEMANIFOLD PLATE

FRONT LIP

NOTES:

1.DO NOT ATTEMPT TO CHANGE MANIFOLD GAS PRESSURE. GAS VALVE IS SET CORRECTLY FOR NATURAL OR PROPANE.

2.CHECK GAS INLET PRESSURE (MIN. 4” W.C., MAX. 13” W.C.) WITH MANOMETER BY CONNECTING TO GAS INLET PRESSURE TAP ON THE GAS VALVE LOCATED JUST ABOVE THE GAS INLET PIPING.

Weil-McLain

500 Blaine Street

Michigan City, IN 46360-2388

http://www.weil-mclain.com

GV-6 510-811-615, GV-4 510-811-605, GV-3 510-811-600, GV-5 510-811-610 specifications

The Weil-McLain GV series consists of several high-efficiency boilers, including the GV-6 (510-811-615), GV-3 (510-811-600), GV-5 (510-811-610), and GV-4 (510-811-605). These gas-fired boilers are designed for residential and light commercial applications, delivering reliable heating performance while optimizing energy efficiency.

One of the standout features of the Weil-McLain GV series is the incorporation of high-efficiency technology. These boilers utilize a fully modulating gas burner, which allows for precise control over the combustion process. This leads to increased efficiency and reduced energy consumption, resulting in lower utility bills for homeowners and commercial property managers. The GV series boasts an AFUE (Annual Fuel Utilization Efficiency) rating that rivals many competing products in the market, making them a cost-effective choice for heating needs.

The GV series also features a high-quality, durable cast iron heat exchanger. Cast iron is known for its heat retention properties and longevity, which helps ensure that the boiler maintains optimal performance over time. Weil-McLain has engineered these units with advanced materials and construction techniques to minimize the risk of corrosion and enhance durability. This means that end-users can expect less frequent maintenance and a longer service life from their heating systems.

In terms of installation and operation, the Weil-McLain GV series is designed with convenience in mind. The compact design of these boilers allows for easy installation in tight spaces, and the units are equipped with a user-friendly control interface. These controls enable homeowners to adjust settings and monitor performance effortlessly. Additionally, the GV series is compatible with various heating systems, including hot water and steam, providing versatility to meet specific heating requirements.

Safety features are also a priority for Weil-McLain. The GV series includes safety shut-off mechanisms and integrated venting solutions to ensure proper operation and prevent hazardous situations. This attention to safety and reliability makes these boilers a preferred choice for heating professionals.

In conclusion, the Weil-McLain GV-6, GV-3, GV-5, and GV-4 models offer advanced heating technology, robust construction, efficient performance, and user-friendly features. When choosing a boiler for residential or light commercial applications, the GV series stands out for its combination of efficiency, durability, and safety, making it an excellent investment for long-term heating needs.