Dolphin | Basic Operation Instructions | 5 |
Status LED
Indicates On/Off Status, and flashes to indicate system faults.
On/Off Switch
Toggles the system on or off.
Drive Program Display
A
Remote Status LED
Indicates status of Dolphin Remote.
Drive Program Select Switch
This switch will scan through and select one of five drive programs.
Hazard Light Switch & LED
Press to make both indicators flash simultaneously. Press again to turn off. LED flashes when activated.
Battery Gauge
A series of ten LEDs, which indicate charge level
Left & Right
Indicator Switches & LEDs
Press the appropriate switch to activate 
turn indicator. Press again to turn off.
LED flashes when activated.
Horn Switch
Press to activate warning horn.
Light Switch & LED
Toggles the head/tail/side lights on or off. LED is lit when activated.
seat height | leg rest adjust back tilt | seat tilt |
| (right & left) |
|
Actuator Select Switches
5 switches for actuator selection. Not used for actuator operation, only selection. LED above switch lights up when activated.
Magnetic Key Lock & LED
Locks DX System to prevent unauthorized use. Upon reactivation of unit, LED will flash until magnetic key is used to unlock system.
Joystick
Controls the speed and direction of power chair, as well as actuator control when selected.
Magnetic Key
Used to lock and unlock the DX System.
BACK VIEW
Battery Connection Socket
Connects to Battery Charger Plug.
DXBUS Sockets
Enables DXBUS cable to be used to interconnect to the remainder of the DX System.