Maintenance, General, Cleaning Procedure | Omega Engineering LVU-90

MAINTENANCE

Step Eight

General:

The LVCN-90 series level transmitter itself requires no periodic maintenance except cleaning as required. It is the responsibility of the user to determine the appropriate maintenance schedule, based on the specific characteristics of the application liquids.

Cleaning Procedure:

1.Power: Make Sure that all power to the transmitter, controller and/or power supply is completely disconnected.

2.Sensor Removal: In all through-wall installations, make sure that the tank is drained well below the sensor prior to removal. Carefully, remove the sensor from the installation.

3.Cleaning the Sensor: Use a soft bristle brush and mild detergent, carefully wash the transducer of the LVCN-90. Do not use harsh abrasives such as steel wool or sandpaper, which might damage the transmitter's surface. Do not use incompatible solvents which may damage the PVDF transducer or the transmitter’s PP body.

4.Sensor Installation: Follow the appropriate steps of installation as outlined in the installation section of this manual.

Step Nine

LVU-90 specifications

Omega Engineering has long been a leader in providing innovative solutions for temperature and process measurement, and one of its standout products is the LVU-90 Liquid Level Transmitter. This device is designed to offer reliable and accurate liquid level measurement in a variety of industrial applications. The LVU-90 leverages advanced technologies to ensure precision while maintaining versatility across different environments.

One of the main features of the LVU-90 is its non-contact measurement capability. This characteristic allows the transmitter to determine liquid levels without needing to make physical contact with the liquid itself. This is particularly advantageous in applications involving corrosive or hazardous materials, where traditional contact measurement methods may pose risks or lead to deterioration over time. The non-contact design also reduces maintenance requirements, ultimately increasing operational efficiency.

Another notable feature of the LVU-90 is its ability to operate in a wide temperature range. The device is designed to function in both extreme heat and cold, providing versatility for various industrial settings. This robust temperature tolerance ensures that the LVU-90 can be employed in diverse applications, from water and wastewater management to chemical processing and agriculture.

The LVU-90 utilizes advanced ultrasonic technology for its measurement process. By emitting ultrasonic waves from the transmitter, it measures the time taken for the waves to travel to the surface of the liquid and back, allowing for highly accurate level readings. The utilization of this technology minimizes the influence of factors such as temperature or pressure variations, resulting in dependable performance under differing operational conditions.

Additionally, the LVU-90 is equipped with a user-friendly interface that simplifies setup and provides clear diagnostic information. Its integration capabilities allow for seamless connectivity with existing control systems, enabling real-time monitoring and enhancing overall process management.

The LVU-90 also features a durable construction, designed to withstand harsh environments. This robustness ensures longevity and reduces replacement frequency, offering significant cost savings over time. With its combination of cutting-edge technology, ease of use, and resilience, the Omega Engineering LVU-90 Liquid Level Transmitter emerges as a superior choice for industries seeking reliable liquid level measurement solutions.