Humidifiers, General | Nortec Industries NHRS Series guide

1.HUMIDIFIERS

A.GENERAL

(1)Work Included

(a)NORTEC NHRS Resistive Element steam humidifier[s] as indicated on drawing[s] and as indicated on schedule[s].

(b)Complete and operable humidification system [which meets applicable building codes].

(c)Equipment start-up and project inspection by qualified factory trained representative.

(2)Quality Assurance

(a)Manufacturer: For each product specified, provide components by same manufacturer throughout.

(b)Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, Article 100, by a testing agency acceptable to authority having jurisdiction, and marked for intended use.

(c)Comply with ARI 640, “Standard for Commercial and Industrial Humidifiers.”

(d)Products shall be supported with a warranty that ensures the product will be free from defects in materials and workmanship for a period of two years after shipment.

(e)Commissioning of a system or systems specified in this section is part of the construction process. Documentation and testing of these systems, as well as training of the Owner’s operation and maintenance personnel, is required in cooperation with the Commissioning Authority. Project Closeout is dependent on successful completion of all commissioning procedures, documentation, and issue closure. Refer to Project Closeout, Section 01700, for substantial completion details. Refer to Section 01810, Commissioning, for detailed commissioning requirements.

(f)Products specified below are to be manufactured is an ISO 9001-2000 certified facility.

(3)Submittals

(a)Submit product data under provisions of Section 15010. Include product description, model, dimensions, component sizes, rough-in requirements, service sizes, and finishes. Include rated capacities, operating weights, furnished specialties, and accessories.

(b)Submit manufacturer’s installation instructions.

(c)Submit operation and maintenance data.

(d)Submit coordination drawings. Detail fabrication and installation of humidifiers. Include piping details, plans, elevations, sections, details of components, and dispersion tubes. Detail humidifiers and adjacent equipment. Show support locations, type of support, weight on each support, and required clearances.

(e)Submit wiring diagrams including power, signal, and control wiring. Differentiate between manufacturer-installed and field-installed wiring.

(f)Submit minimum water quality requirements and water pressure requirements.

10-20

Page 2 2008-02-18

NHRS Series specifications

Nortec Industries has established itself as a leader in the HVAC and dehumidification industry with the introduction of its NHRS Series. This remarkable line of products is designed to meet the complex needs of various applications, ensuring optimal indoor air quality while maximizing energy efficiency.

One of the standout features of the NHRS Series is its robust construction. Built using high-quality materials, these units are designed to withstand demanding operating conditions, making them suitable for both residential and commercial environments. The series includes a range of models with different capacities, addressing the needs of small spaces up to large facilities effectively.

A significant technological advancement in the NHRS Series is its advanced control system. The series is equipped with sophisticated microprocessor-based controls that allow for precise monitoring and regulation of indoor humidity levels. Users can easily set desired humidity targets, and the system adjusts its performance dynamically to maintain those levels without unnecessary energy consumption.

Moreover, the NHRS Series incorporates energy recovery ventilators, which allow for the efficient exchange of air without sacrificing comfort. By capturing heat and moisture from the outgoing air and transferring it to the incoming air, these ventilators optimize energy use, reducing heating and cooling costs significantly. This is particularly beneficial in climates with extreme temperature variations.

Additionally, the NHRS Series features advanced filtration options that enhance indoor air quality. With built-in capabilities for MERV-rated filters, the systems capture airborne particles, allergens, and pollutants, ensuring that occupants breathe cleaner air. This is particularly crucial in industrial settings where air quality can directly impact health and productivity.

Another hallmark of the NHRS Series is its user-friendly interface. The systems are designed with an intuitive control panel that provides real-time feedback on operational performance and maintenance needs. This makes it easy for users to monitor system health and efficiency, enhancing reliability and reducing downtime.

In summary, the Nortec Industries NHRS Series stands out for its robust construction, innovative control technologies, energy recovery capabilities, advanced filtration systems, and user-friendly design. These features combine to offer effective humidity control solutions, making the NHRS Series a top choice for anyone looking to improve their indoor air quality and energy efficiency in a sustainable manner. Whether for a small home or a large commercial application, this series delivers on performance, reliability, and user satisfaction.