Changing suction nozzles, Cause, Warranty

SSE 350

Control/Operation

Hook in fresh water bag:

•Hook tab of fresh water bag on left side of tank opening seen in direction of travel. (Fig. 3/1)

•Separate cover from suction hoses and flush thoroughly.

•Flush suction sieve for cleaning agent (Fig. 4/2) and sieve in cover with clean water.

•Clean machine and suction lips with damp cloth. Clean brushes and pads with water if necessary.

3.4Troubleshooting

CAUTION!

Always disconnect mains plug/ battery connection before working on machine!

Fault

Machine does not run

•To clean pads or brushes, tilt machine back onto handle.

•Pull brush and driving disk off mount and wash. (Fig. 11)

•When remounting, make sure that brush or driving disk engages in groove.

3.3.3 Changing suction nozzles

•Remove tank.

•Tilt machine back onto handle.

•Press in clips at left and right on

WARNING!

Only carry out maintenance and repair work described in the operating instructions.

Always leave servicing and repair work, especially the elimination of electrical faults, to the Alto Customer Service technicians or to an authorised specialist.Fachkraft.

Cause

>Mains/battery plug not connected.

>Fuse blown or earth-leakage circuit-breaker tripped.

>Overheating protection has been activated.

>Power supply interrupted.

suction nozzles. (Fig. 10/1)

•Pull off suction nozzles downward. (Fig. 10/2)

•Position new suction nozzles and audibly engage with light pressure.

3.3.4 Changing brushes

•Remove tank.

•Tilt machine back onto handle.

•Release brushes at left and right and pull off (remove by turning).

3.4.1Warranty

Non-compliance with the handling instructions, repairs carried out with non-original spare parts and attempts to carry out the repairs by the user lead to a loss of the right to make claims under the warranty.

Remedy

•Plug in mains/battery plug.

•Check fuse or earth-leakage circuit-breaker.

•Allow motor to cool.

•Have supply line checked by electrician.

Insufficient suction	> Suction nozzle plugged.	•	Eliminate plugging.
	> Connection of tank cover open.	•	Connect suction hose.
	> Tank cover not properly fitted or	• Fit tank cover properly or replace
	seal defective.		seal.
	> Suction sieve in tank cover	• Rinse sieve with clean water.
	plugged.
	> Drain plug on tank not	• Check seal, press on plug firmly.
	completely closed.

Stripes form	> Suction lips dirty or worn.	• Clean or replace suction lips.

Insufficient supply of cleaning	> Lines or nozzles plugged with
agent	cleaning agent.

•Flush fresh water tank and line system. (Chap. 3.3.1)

SSE 350 specifications

The Nilfisk-ALTO SSE 350 is a highly efficient, versatile vacuum cleaner designed for industrial and commercial applications. Combining advanced technology with practical features, the SSE 350 is tailored to meet the demanding requirements of cleaning professionals in various environments.

One of the standout features of the SSE 350 is its powerful motor, which delivers a robust suction capability. This ensures that it can effectively pick up both dry and wet debris, making it ideal for a range of applications, from cleaning construction sites to maintaining retail spaces. The vacuum’s capacity is supplemented by a large collection tank, allowing for extended cleaning sessions without the need for frequent emptying.

The design of the SSE 350 emphasizes user comfort and ease of use. It is equipped with ergonomic handles and a well-balanced structure, which makes it easy to maneuver. The lightweight design combined with durable wheels allows for smooth movement across different surfaces, reducing user fatigue during prolonged use. Additionally, the vacuum features a compact size, enabling it to fit into tight spaces and be easily stored when not in use.

In terms of technology, Nilfisk-ALTO has incorporated advanced filtration systems in the SSE 350. This includes high-efficiency particulate air (HEPA) filters that effectively capture fine dust particles, ensuring a healthier indoor air quality. The filtration system is designed to be easily accessible, allowing for quick maintenance and replacement, which enhances the vacuum’s overall longevity.

Another remarkable characteristic of the SSE 350 is its integrated noise-reduction technology. This feature minimizes operational sound levels, making it suitable for use in noise-sensitive environments such as offices and hospitals. This combination of power and quiet operation sets the SSE 350 apart from other models in its class.

Maintenance is simplified through the vacuum’s innovative design, which includes tool-free access for easy cleaning and servicing. The durable construction materials contribute to its longevity, ensuring that it can withstand the rigors of daily use.

Overall, the Nilfisk-ALTO SSE 350 stands out as a reliable and effective cleaning solution. Its powerful performance, user-friendly design, advanced filtration technology, and low noise levels make it a top choice for cleaning professionals seeking a versatile vacuum that can tackle a wide range of tasks efficiently. Whether for industrial applications or commercial cleaning, the SSE 350 is engineered to deliver superior results.