Limited Warranty, Heater Assembly | Nilfisk-ALTO PHH15002A specification

Heater Assembly

1.After removing the heater from its carton, carefully inspect it for possible shipping damage. Return damaged units to point of purchase.

2.Remove plastic support leg extensions from packaging. Line up the slots and slide extension into end panels as shown. (See Figure 1).

Figure 1

Correct

Incorrect

Heater Operations

1.The PHH15002 is provided with a POSITIVE OFF thermostat. In addition to the thermostat, the PHH15002 has a LO/HI heat selection switch.

2.Operation is as simple as A-B-C:

a.Plug heater power supply cord into 120 volt outlet (see warnings 1, 3, 4, 5 & 6). The rocker switch on the PHH 15002 will illuminate, indicating power is on.

b.Move heat selection switch to the “LO” position for 750 watts or to the “HI” position for 1500 watts.

c.Rotate the thermostat knob to the right until it stops.

NOTE: You may notice a new smell coming from your heater during initial use. It should go away within the first few hours of operation.

3.Allow the heater to operate normally until the room temperature is comfortable to you. Then simply rotate the thermostat knob to the left until the thermostat clicks. The thermostat will then automatically turn your heater on and off to maintain the room temperature.

4.To adjust the room temperature, rotation of the thermostat knob to the right will increase the heater output while rotation of the thermostat knob to the left will decrease the output. The numbers on the thermostat knob are for reference only and may help you in setting and adjusting the heater output for your comfort.

5.To turn heater off, rotate the thermostat knob to the left until it stops. Always unplug heater when not in use.

Cleaning Instructions

(See Warning No. 11)

1.From time to time, your heater will require cleaning to remove dust and dirt from the element fins and outlet air grille. Maintaining a clean heater will help the heater operate cooler and thus safer.

2.Always turn power off and unplug heater before cleaning.

3.Use vacuum cleaner with brush attachment to carefully remove all dust and dirt from element fins and outlet air grille.

NOTE: Use care not to bend fins while cleaning.

4.To clean painted heater surfaces, use damp cloth only. Do not use waxes, etc. because they sometimes discolor due to temperature.

LIMITED WARRANTY

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of pur- chase, except the element which is warranted for 10 years after purchase. This warranty does not apply to damage from accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained in viola- tion of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization, include all catalog numbers shown on the products.

NEED TECHNICAL OR WARRANTY ASSISTANCE?

PLEASE CALL TOLL-FREE 1-800-642-HEAT.

ECR 34741
11/01	5200-2365-002

SPX Corporation

470 Beauty Spot Rd. East

Bennettsville, SC 29512 USA

PHH15002A specifications

The Nilfisk-ALTO PHH15002A is a high-performance pressure washer that has captured the attention of both professional users and DIY enthusiasts. Its power, design, and innovative features make it a standout choice in the market. Designed for heavy-duty tasks, this pressure washer boasts a robust motor that delivers exceptional cleaning power, making it suitable for a variety of surfaces including patios, driveways, vehicles, and outdoor furniture.

One of the main features of the PHH15002A is its impressive pressure output, with the ability to reach up to 150 bar. This level of pressure ensures that even the most stubborn dirt and grime are effectively removed. Complementing the high-pressure output is a flow rate of approximately 500 liters per hour, which allows for efficient cleaning without excessive water consumption.

The machine is equipped with a durable, lightweight design, enhancing portability and ease of use. The built-in wheels and ergonomic handle allow for smooth maneuverability across different terrains. Additionally, the PHH15002A comes with an adjustable telescopic handle, accommodating users of varying heights and ensuring comfortable operation.

When it comes to technology, the Nilfisk-ALTO PHH15002A incorporates an advanced motor with an automatic stop/start function. This technology not only increases energy efficiency but also extends the lifespan of the machine by reducing wear on the motor when not in use. Furthermore, the unit features a comprehensive range of nozzles, including a turbo nozzle for extra cleaning power and a wide fan spray for gentler cleaning tasks.

Safety is another paramount concern addressed by the PHH15002A. It is designed with an integrated thermal protection system, which prevents overheating during prolonged use. Additionally, the device includes an anti-tangle hose, minimizing hassles during operation and ensuring a cleaner work environment.

The Nilfisk-ALTO PHH15002A is also highly versatile, accommodating a range of accessories for different cleaning needs, including surface cleaners and foaming attachments. This flexibility allows users to customize their cleaning experience, ensuring optimal results regardless of the task at hand.

Overall, the Nilfisk-ALTO PHH15002A stands out as a powerful, efficient, and user-friendly pressure washer, making it an ideal investment for anyone looking to elevate their cleaning game. Its combination of advanced features, robust design, and exceptional performance solidifies its position as a leading choice in the pressure washer market.