Safety cable installation | Monte Carlo Fan Company 3TSR52XXD

Insert downrod into yoke on top of the Fan Body. Align the hole in the Downrod with the hole in the Yoke. Insert the Pin through the Yoke and Downrod until the point appears on the other side. Install the keeper to pin.

Hang assembled fan from the mounting bracket installed to ceiling in previous step. Make sure the fan is hanging straight. Rotate fan until the tab on the Mounting bracket engages the slot on the Downrod Ball. This must be done to prevent the fan body from rotating when the blades are in motion.

Slide remote receiver into mounting bracket.

Align the blade with castings on motor to attach blades to motor.

Tighten the 2 set screws on the Yoke once the downrod is in place.

white black

Make wiring connections as indicated above. White from fan to white from remote marked N. Blue from fan to blue from remote marked light. Black from fan to Black from remote marked L. White from house to white from remote marked AC N . Black from house to Black from remote marked AC L. Connect all green ground wires to Ground wire from House.

Make wire connections to power source using wire nuts provided. Make sure that no filiments are outside of the wirenut. After making the wire connections, the wires should be spread apart with the grounded con- ductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Loosen 2 screws and remove 1 screw from motor plate and save screw.

9Safety cable installation

Safety Cable

Lag Screw

safety cable

washer

3” lag lock screw washer

For Canadian installation and for USA fan and light kit combinations over 35 lbs, in both flush and downrod mode the safety cable must be installed into the house structure beams using the 3” lag screws,washers, and lock washers. provided. Make sure that when the safety cable is fully extended the leadwires are longer than the cable and no stress is placed on the lead- wires.

Remote Transmitter Dip swtiches

Remote Receiver Dip switches

Set dip switches on the Remote Transmitter and Remote Receiver to the same settings. This must be done so the units will communcate properly. If you have other fans you can set to control from one transmitter by setting both receivers the same as the transmitter. If you have more than one fan with remote. You can set the dip switches to different positiosns to have seperate control.

Next lift the canopy, twist into place and tighten 2 screws securely. The canopy should adjust for any irregularity in the ceiling or Outlet box.

Install light plate by twisting plate with key hole slots into place. Replace screw removed and tighten the 3 screws securely.

3TSR52XXD specifications

The Monte Carlo Fan Company 3TSR52XXD is a stunning addition to any indoor or outdoor space, renowned for its sophisticated design and exceptional functionality. This ceiling fan combines aesthetics with innovative technology, making it an ideal choice for homeowners seeking both style and efficiency.

One of the key features of the Monte Carlo 3TSR52XXD is its unique three-blade design, which not only enhances its modern look but also improves airflow efficiency. The fan is meticulously engineered to deliver powerful yet quiet operation, ensuring that users enjoy a comfortable environment without disruptive noise. With a 52-inch blade span, it is perfectly suited for medium to large-sized rooms, effectively circulating air to provide a refreshing breeze on warm days.

The fan is equipped with DC motor technology, which significantly increases energy efficiency compared to traditional AC motors. This technology allows the fan to operate at a lower speed while still delivering impressive airflow, resulting in lower energy consumption and cost savings over time. The DC motor also extends the fan's lifespan, making it a durable choice for any home.

Another notable characteristic of the 3TSR52XXD is its versatility in design. It is available in various finishes, including sleek matte black and sophisticated brushed pewter, allowing it to seamlessly integrate into any decor, from contemporary to traditional. The fan’s remote control convenience enables users to adjust the speed and direction effortlessly, providing a tailored comfort experience.

Moreover, the 3TSR52XXD supports reversible motor functionality, allowing for both summer and winter use. During warmer months, the blades can rotate counter-clockwise to create a cool downdraft. In colder months, reversing the blade direction pushes warm air downwards, promoting even heating throughout the space.

For added functionality, the Monte Carlo 3TSR52XXD is compatible with various smart home systems, allowing users to integrate it effortlessly into their existing setups. This smart technology not only enhances convenience but also enriches the overall user experience.

In conclusion, the Monte Carlo Fan Company 3TSR52XXD is an exemplary model that combines sleek design, advanced technology, and energy efficiency. Its aesthetic appeal, paired with its practical features, makes it a highly desirable ceiling fan for any contemporary home.