Monte Carlo Fan Company 3ASR52XXD Phillips Screwdriver Wire Cutters, Step Ladder

Page 2

SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

1.Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999),

2.including fire-rated construction.

3.Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding con-

4.ductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device,

5.such as a tag, to the service panel.

6.Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

7.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7

8.feet from the floor to the trailing edge of the blade.

To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support.

9.Use only the screws provided with the outlet box. (Mounting must support at least 35 lbs.)

Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating

10.blades.

11.Attach the mounting bracket using only the hardware supplied with the outlet box.

12.To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

13.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

14.NEVER place a switch where it can be reached from a tub or shower.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heat- ing equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA),

15.and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

 

 

Phillips Screwdriver

Wire Cutters

Pliers

 

1

 

 

2

 

 

 

 

 

 

 

 

 

Before you begin installing the fan, Switch

 

 

 

 

 

 

 

 

 

 

Before installing this fan make sure the outlet box is

 

 

power off at Service panel and lock service dis-

 

 

 

connecting means to prevent power from being

 

properly installed to the house structure. To reduce

 

 

switched on accidentally. When the service dis-

 

the risk of fire, electric shock, or personal injury,

 

 

connecting means cannot be locked, securely

 

mount to outlet box or supporting system acceptable

 

 

fasten a prominent warning device, such as a

 

for fan support. (Mounting must support at least 35

 

 

tag, to the service panel.

 

lbs.)

 

 

 

 

 

 

5

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

Fo

r downrod

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mount go to step

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

For flush mount

 

 

keeper into pin and save for

 

 

go to step 29

 

 

Remove keeper from pin. Replace

 

 

 

 

later.

3Step Ladder

Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securley fastened by at least two points to a structural ceiling member ( a loose box will cause the fan to wabble). Use only the screws provided with the outlet box.

6

Loosen the 2 set screws in yoke for downrod to slip into yoke.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents OWNER’S Manual Step Ladder Phillips Screwdriver Wire CuttersSuch as a tag, to the service panel Safety cable installation Slide remote receiver into mounting bracket Blade plateFlush Mount Instalation Go to for Light kitCenter Canopy Hole Larger Holes Smaller Fan speed Rouble Hooting

3ASR52XXD specifications

The Monte Carlo Fan Company 3ASR52XXD ceiling fan is a perfect blend of modern aesthetics and advanced technology, designed to enhance the ambiance and comfort of any room. With its sleek design and energy-efficient performance, this fan stands out in the competitive ceiling fan market.

One of the main features of the 3ASR52XXD is its 52-inch blade span, making it suitable for medium to large rooms while providing an optimal airflow distribution. The fan is engineered with a powerful motor that delivers impressive air movement, ensuring a cool and comfortable environment even in the warmest of settings. The fan operates quietly, allowing for a peaceful atmosphere, which is particularly beneficial for bedrooms and home offices.

The Monte Carlo 3ASR52XXD is equipped with a variety of technologies that enhance its functionality. One notable feature is the remote control capability, which allows users to easily control the fan speed and light settings from anywhere in the room. This convenience is complemented by the integrated LED light kit, providing energy-efficient illumination that minimizes electricity consumption while delivering ample light.

Another characteristic worth highlighting is the fan's stylish finish. Available in various color options such as matte black, brushed steel, and white, the 3ASR52XXD can seamlessly integrate into any decor style, from contemporary to traditional. The blades are designed for durability and are crafted from high-quality materials that resist warping and fading, ensuring long-lasting performance.

Furthermore, the Monte Carlo Fan Company emphasizes energy efficiency, and the 3ASR52XXD meets the stringent Energy Star requirements. This not only helps in reducing utility bills but also contributes to a more sustainable environment. The fan features three distinct speed settings, allowing for customizable airflow to meet different preferences.

In conclusion, the Monte Carlo Fan Company 3ASR52XXD ceiling fan is a remarkable choice for those seeking a stylish, efficient, and functional ceiling fan. Its blend of powerful performance, modern design, and innovative features makes it a valuable addition to any home setting. Whether for cooling a living space, providing ambient lighting, or simply enhancing decor, the 3ASR52XXD is an excellent investment.
Top Page Image Contents