Minolta W121CA TSC2 Select the Best Location, Remove the Air Conditioner From the Case

Page 15

Hardware

Installation Steps

Installation

Read completely, then follow step-by step.

•The appliance shall be installed in accordance with national wiring regulation.

•If a power plug isn't to be used, provide a circuit breaker between power source and the unit, as following picture.

Main Power source

Circuit Breaker

Use a circuit breaker or time delay.

ENGLISH

SelecttheBestLocation

1.To prevent vibration and noise, make sure the unit is installed securely and firmly.

2. Install the unit where the sunlight does not shine directly on FOAM the unit.

AWNING FENCE

HEAT

RADIATION

3.There should be no obstacle, such as a

fence or wall, within 50cm from the back of the cabinet because it will prevent heat radiation of the condenser. Restriction of outside air will greatly reduce the cooling efficiency of the air conditioner.

4.Install the unit a little obliquely outward not to leak the condensed water into the room (about 10 ~ 15 mm or 1/4 bubble with level).

COOLED

AIR

70-150cm

10~15 mm Over 50 cm

1/4 Bubble

CAUTION: All side louvers of the cabinet must remain exposed to the outside of the structure.

Level

RemovetheAirConditionerFromtheCase

1.

Remove the 2 shipping screws from the back of the

3.

Slide the air conditioner from the case by gripping

 

case.

 

the base pan handle and pulling forward while

 

 

 

bracing the case.

2.

Remove the 2 screws on each side of the case.

4.

Before installing the Air Conditioner back into the

 

Keep these for later use.

 

case, remove the white styrofoam shipping block

 

 

 

from the compressor (Applicable for some models).

 

Shipping screws

 

White styrofoam block

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Room Air Conditioner Table of Contents English Operation Do not allow water to run Thinner ControlsControls Location and Function of ControlsOperation Heater Lamp ControlsHow to Insert the Batteries Remote Control OperationAir Direction VentilationAdjusting the Air Flow Direction How to Attach Drain Pan Some ModelsOutdoor Coils Air Filter Cleaning Care and MaintenanceHardware Installation FeaturesInstallation Hardware Remove the Air Conditioner From the Case Select the Best LocationUse the Reversible Inlet Grille Install the Air Conditioner in the CaseCommon Problems and Solutions Español NotaNo. MFL57207001

W121CA TSC2 specifications

The Minolta W121CA TSC2 is a standout model in the realm of digital copiers and multifunction printers, demonstrating a seamless integration of advanced technology and user-friendly features. Designed for small to medium-sized businesses, this device offers an ideal solution for all printing, scanning, and copying needs, ensuring efficiency and productivity.

One of the chief features of the W121CA TSC2 is its high-quality printing capability. With a resolution of up to 1200 x 1200 dpi, it ensures crisp and vibrant prints that bring documents to life. This level of clarity is crucial for businesses that require professional-looking materials, including marketing collateral, presentations, and reports.

In terms of speed, the W121CA TSC2 does not disappoint. It boasts a rapid printing speed of up to 30 pages per minute, allowing users to quickly produce large volumes of documents without sacrificing quality. Coupled with a large paper capacity, the printer minimizes downtime, enabling smoother workflows in a busy office environment.

Another notable technology utilized in the W121CA TSC2 is its advanced scanning features. The device supports both color and black-and-white scanning with an option for duplex scanning, which allows users to scan double-sided documents in one pass – enhancing efficiency and minimizing paper usage. It can scan at impressive speeds, making it an ideal choice for offices that handle a significant amount of paperwork daily.

User convenience is a top priority in the W121CA TSC2. The device is equipped with a user-friendly touchscreen interface that simplifies navigation through various functions, including copying, printing, and scanning. The setup process is streamlined, allowing even those with minimal technical expertise to operate it efficiently.

Connectivity options on the W121CA TSC2 are robust, featuring USB, Ethernet, and wireless capabilities. This ensures seamless integration into existing office networks and easy access for multiple users, enhancing collaborative efforts within teams. Additionally, it supports mobile printing solutions, offering flexibility and convenience for users on the go.

Energy efficiency is another important characteristic of the Minolta W121CA TSC2. It complies with energy-saving standards, reducing its environmental impact and generating cost savings on energy consumption. The device is designed with a sleep mode feature that automatically powers down when not in use, further conserving energy.

In summary, the Minolta W121CA TSC2 is a high-performance multifunction printer that combines speed, quality, and convenience. Its features make it a valuable asset for businesses looking to enhance their document management processes while maintaining a commitment to sustainability. Whether printing, scanning, or copying, the W121CA TSC2 rises to meet the diverse needs of modern workplaces.
Top Page Image Contents