Cleaning and Maintenance cont’d, To Remove Parts

QUARKSP6647 HD14070:SP6647 .qxd 12/10/2009 3:39 PM Page 13

Cleaning and Maintenance (cont’d.)

WARNING: To reduce the risk of shock, always unplug humidifier before cleaning or servicing. If humidifier is not unplugged, fan could start after housing is removed.

Step 2:

To Remove Parts

a.Open the pivoting lid and remove water bottles nd set aside. Grasp the fan assembly front center and rear center. Lift off and set aside on a clean flat surface. The filter housings are now accessible.

b.Before removing the internal parts of the humidifier cabinet, we recommend moving the humidifier to an area where floor covers are not susceptible to water damage, i.e.; kitchen or bath area. Lift the filter housing assemblies out of the cabinet and set to the side.

c.Remove the water level float from the humidifier cabinet by pinching the float retainer to release it from the cabinet. The cabinet should be empty before cleaning. The cabinet consists of the lower areas of the humidifier where the filters are during normal operation time.

d.Empty cabinet of any remaining water.

e.Proceed to “Bi-Weekly Maintenance” or “End of Season Maintenance”.

Bi-Weekly Maintenance

Removing Scale

1.Fill the reservoir with water and add one 8 oz. (236 ml) cup of undiluted white vinegar. Let solution stay for 20 minutes.

2.Clean all interior surfaces with soft brush. Dampen soft cloth with undiluted white vinegar and wipe out reservoir to remove scale.

3.Rinse thoroughly with clean warm water to remove scale and cleaning solution before disinfecting the reservoir.

Disinfecting Humidifier Cabinet and Water Bottles

1.Fill humidifier cabinet with

1 teaspoon (5 ml) chlorine bleach in 1 gallon (3.8 litres) of water.

Let solution stay for 20 minutes, carefully swishing every few minutes. Wet all surfaces normally exposed to water.

2.Empty humidifier cabinet after 20 minutes. Rinse with water until bleach smell is gone. Allow unit to dry out completely.

3.Water bottles should be cleaned in the same manner.

f.Remove old filters and dispose of properly as described on pages 11-12.

Step 3:

Install new filters (purchase the correct evaporative wicking filter pads HDC12 for your humidifier) into the location where the old filters were positioned. Install the filter housings with the new filters into the correct location. Reinstall the water level float. NOTE: Float retainer should be positioned in normal operating mode. Assure that it is positioned in the bottom of the slot in the back of the cabinet (See page 9 for diagram of slot).

Position the fan assembly on top of the cabinet and return the humidifier to the desired location for use.

Refill humidifier bottles with fresh cool water and return them to the cabinet. Plug the unit into a 120 volt A.C. power outlet and set the controls per the “Operating Humidifier Controls” section (page 8) of this manual.

End of Season Maintenance

1.Follow “Bi-Weekly Maintenance” instructions at end of humidification season.

2.Remove and throw away filters.

3.Let humidifier dry completely before

storing. Do not store with water inside cabinet or water bottles.

4.Store in cool, dry location.

5.Install a new filters in clean humidifier before next season begins.

6.“Bi-Weekly Maintenance” procedure is also recommended if you do not plan to run the humidifier for one week or more.

HD14070 specifications

The MoistAir HD14070 is a highly advanced dehumidifier designed to tackle humidity problems in large spaces, offering an effective solution for both residential and commercial environments. This model combines exceptional performance with innovative technologies, making it a top choice for users seeking reliable humidity control.

One of the main features of the MoistAir HD14070 is its impressive dehumidification capacity, which can remove up to 70 pints of moisture from the air daily. This makes it ideal for areas such as basements, large living spaces, and warehouses where humidity levels can become problematic. The unit is equipped with a robust compressor that efficiently regulates humidity levels, ensuring a comfortable environment.

The MoistAir HD14070 utilizes intelligent technologies such as a built-in humidity sensor. This sensor continuously monitors the humidity levels in the space and automatically adjusts the dehumidification settings accordingly. This feature not only enhances energy efficiency but also ensures optimal performance, as the unit operates only when necessary.

Another key characteristic of the HD14070 is its user-friendly digital control panel. This panel allows users to set their desired humidity levels and schedule operation times. Additionally, it features a convenient timer and a continuous drainage option, enabling users to set it and forget it without the hassle of manual emptying.

In terms of design, the MoistAir HD14070 boasts a compact and portable structure, making it easy to move from one room to another. It also comes with sturdy wheels and a handle, enhancing its portability. The quiet operation of this dehumidifier ensures that it can function unobtrusively in any environment, providing a comfortable living space without the disruptive noise often associated with dehumidifiers.

Energy efficiency is a significant aspect of the MoistAir HD14070. The unit is designed to meet Energy Star standards, which means it operates efficiently while ensuring lower energy consumption, ultimately helping users save on utility bills.

In summary, the MoistAir HD14070 stands out in the market due to its powerful dehumidification capabilities, intelligent features, user-friendly controls, and energy efficiency. Whether it's used in a home or a commercial setting, this dehumidifier effectively maintains comfortable humidity levels, protecting both health and property from the detrimental effects of excess moisture.