HOW to USE, Use as Air Circulator | Lakewood Engineering HV-18

WARNING

ELECTRICAL SHOCK HAZARD

Do not use near water or other fluid.

Use your fan only in dry environments. Do not place fan in bathroom, laundry area, or similar locations, or near sinks, washing machines, swimming pools or other sources of water. Never locate fan where it may fall into a bathtub or other water container. Do not use outdoors. Do not use in damp environ- ments such as flooded basements or garages.

WARNING

FIRE HAZARD

Do not use near combustible materials or flammable gasses or sources of heat.

To reduce the risk of fire or electric shock, do not use this fan with any solid state speed control device such as a dimmer switch.

Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause electric shock, and/or a fire hazard.

To Avoid Overloading Motor: Do not leave fan where drapes or curtains will get pulled into the fan or against the fan guard.

A fan has sparking parts inside. Do not use it in areas where gasoline, paint, or flammable materials are used or stored. This fan contains flammable materials and if ignited will support and spread fires.

WARNING

ELECTRICAL SHOCK HAZARD

Use with adequate electrical system.

Do not use with damaged cord or plug.

This appliance has a three-prong grounded plug that must be insertedintoamatchingoutlet. Toreducetheriskofelectricshock, the grounding plug must not be cut off the plug. Where a two- prong wall outlet is encountered, it must be replaced; contact a qualified electrician. Do not use the three-prong plug with a two- prong adapter. DO NOT attempt to defeat this safety feature.

UseyourfanonlywithadequatewiringthatisuptoCode.Connect to properly grounded outlets only.

Do not operate any fan with a damaged cord or plug or after the fan malfunctions, has been dropped or damaged in any man- ner. For repairs covered under warranty, see warranty state- ment. For all other repairs contact Lakewood’s customer service by telephone or mail for information and assistance.

Do not route cord under carpeting. Do not cover cord with throw rugs, runner, or the like. Arrange cord away from traffic area and where cord will not be tripped over.

DO NOT attempt to defeat any of these safety features or instructions.

PLEASE READ BEFORE OPERATING

ASSEMBLY INSTRUCTIONS HV-21 (with 3 piece stand)

•Remove fan and base tube from carton.

•Place fan face down (nameplate down) on floor.

•Rotate the two short legs that are attached to the grille into a straight up position.

•Position stand as shown in drawing, with rear of the base tube close to the switch.

•Depress button on one leg, and slide the base tube onto that leg. Make sure that the button is engaged in the hole in the base tube.

•Depress button on the other leg, and slide the base tube onto that leg. Make sure that the button is engaged in the hole in the base tube.

•Failure to ensure that both buttons are engaged in the base tube holes

can lead to in- jury to persons or damage to property.

•Attach rubber feet contained in plastic bag to the base tube per the enclosed in- structions.

•Plug the female end of the power cord in below the controls.

•Set fan upright onto rubber feet, rotate to the desired angle and plug the cord into a properly grounded electrical outlet. Your fan is now ready to use.

HOW TO USE:

•Plug fan directly into 120 volt AC wall outlet. Be sure plug fits tightly in outlet. A loose fit will cause overheating and damage to the plug. Always operate fan on its base in the normal upright position.

•Set the selector switch to the desired position.

•Todisconnectfan;turnswitchoff,thenremoveplugfromoutlet.

KEEP COOL ON THOSE SWELTERING HOT SUMMER DAYS

USE AS:

BY DAY

Use as Air

Circulator

HV-18, HV-21 specifications

Lakewood Engineering has established itself as a prominent name in the world of innovative machinery, particularly with its HV-21 and HV-18 models. These machinery pieces have garnered attention for their impressive capabilities and cutting-edge technologies.

The HV-21 is engineered for heavy-duty performance, making it suitable for a variety of industrial applications. One of its hallmark features is its robust construction, allowing it to withstand rigorous operational demands. It is equipped with a high-capacity motor that delivers superior torque and power while maintaining energy efficiency. The advanced hydraulic system ensures precise control and smooth operation, making it an ideal choice for operations that require meticulous handling of materials.

On the other hand, the HV-18 model is designed for versatility and adaptability. It features a more compact design than the HV-21, making it easier to maneuver in tighter spaces. This model incorporates a user-friendly control panel that offers intuitive operation, allowing operators to quickly engage with the machine's functions without extensive training. The HV-18 also boasts an advanced safety mechanism, ensuring that operators are protected during operation.

Both models benefit from Lakewood Engineering’s commitment to advanced technology. They are integrated with state-of-the-art digital monitoring systems that provide real-time data on performance metrics. This technology allows for predictive maintenance, reducing downtime and enhancing productivity. Operators can adjust settings remotely, maximizing efficiency and reducing the need for on-site management.

Another noteworthy characteristic of the HV-21 and HV-18 is their emphasis on environmental sustainability. Both models are designed with energy-saving features, minimizing their carbon footprint while delivering optimal performance. This aligns with the growing trend towards eco-friendly machinery in the industrial sector.

In summary, Lakewood Engineering’s HV-21 and HV-18 models exemplify a blend of power, precision, and innovation. They cater to various industry demands, from heavy-duty applications to versatile operations, while incorporating advanced technologies and safety features. With a focus on sustainability, these machines position themselves as leading solutions in the modern engineering landscape, paving the way for future advancements in industrial machinery.