temperature in the room. If the ambient temperature is higher than 81°F, the unit will operate in Cooling mode. If the ambient temperature is below 81°F, the unit will operate in
Note:
The exhaust hose must be attached for proper operation in Auto mode.
Dehumidifying
1)Plug the power cord into a power outlet.
2)Turn on the unit.
3)Press the Mode button until the icon “
” appears in the display.
During the Dehumidifying mode, the unit will condense water out of the air and exhaust it through the exhaust hose. The ambient temperature in the room will probably drop by a few degrees while using the Dehumidifying mode.
Notes:
The fan always runs on low speed while in the Dehumidifying mode.
If you do not use the exhaust hose in Dehumidifying mode, you must manually drain the water from the unit. Additionally, the ambient temperature in the room will probably rise by a few degrees.
The Dehumidifying mode will not work in temperatures below 64°F.
Cooling
1)Plug the power cord into a power outlet.
2)Turn on the unit.
3)Press the Mode button until the icon “
” appears in the display.
4)Select the fan speed by using the Fan button.
5)Set the thermostat using the Temperature / Time buttons. The thermostat is adjustable between 64°F and 89°F in one degree increments.
Cooling mode cools and dehumidifies your air. If the ambient temperature drops below the temperature you selected, the compressor turns off and the unit functions with the fan only. When the temperature rises above the temperature you selected, the compressor turns on again.
Note:
The exhaust hose must be used in Cooling mode in order to cool a room.
Fan-only
1)Plug the power cord into a power outlet.
2)Turn on the unit.
3)Press the Mode button until the icon “
” appears in the display.
4)Select the fan speed by using the Fan button.
Note:
13