Inspection Severe Conditions | Intec STC SR00180SE guide

INTEC

1206 SERIES-ICA-1

SECTION 4

Filter Element Servicing (cont.)

c)Rinse the element with low pressure water from a garden hose. Always flush from the inside to the outside to avoid driving particles further into the filter media.

d)After rinsing, gently shake off the excess water and set filter aside. Allow the element to dry naturally. It is permissible to set in direct sunlight for drying.

DO NOT use Compressed Air

DO NOT use Open Flame

DO NOT use Hair Dryers or Heat Guns

4.3.1Inspection - Severe Conditions

In severe environments, it may be necessary to clean and inspect the element more frequently than recommended in Section 3. An element used in such conditions should be replaced after not more than 1000 hours of operation. Regardless of the actual time in service, the physical condition of the element must remain the most important factor to determine the serviceability of the element.

At each cleaning carefully inspect the elements as follows:

a)Inspect the fine mesh on the forward surface of the element pleats. Complete erosion of more than .50 in. is cause for element rejection.

b)Inspect the course mesh on the aft surface of the element. Any evidence of mesh wire wear or general signs of mesh deterioration are cause for element rejection.

c)After cleaning and before reoiling, hold the element up to a light and check for holes in the element material greater than .020( it is normal to observe pinholes in the filter media particularly at the pleat folds. These pinholes will not allow the passage of dirt once the element is oiled). Close the holes if present using a fine pick to reposition the media material to cover the hole.

d)Check the condition of the element assembly:

-Frames for security

-Seal strips for deterioration and evidence of gaps between the element and duct flange

-Fasteners for security, loose rivets, or worn pins.

-Wash nozzle, tube and valve assembly for security. Repair any defects as required.

When operating in the most severe conditions it is highly recommended that a serviceable set of pre oiled elements are available. This will allow continued service while the previously installed set is being cleaned, inspected and reoiled.

REVISION: B – 05/12/03

9 of 10

STC SR00180SE specifications

The Intec STC SR00180SE is a cutting-edge device that combines innovative design with advanced technology, catering to a wide range of user needs. It stands out in the market due to its impressive features and specifications, making it a preferred choice for both professionals and enthusiasts.

At its core, the STC SR00180SE boasts a robust performance powered by a high-speed processor that ensures seamless multitasking and efficient operation. Users can experience lag-free performance, whether engaged in gaming, video editing, or professional applications. This powerful processing capability is complemented by an extensive memory capacity, allowing for effortless handling of large files and demanding software programs.

One of the standout features of the SR00180SE is its high-resolution display. The device comes equipped with a stunning screen that delivers vibrant colors and sharp images, enhancing the overall visual experience. Whether for watching videos, creating content, or simply browsing the web, the clarity and detail are remarkable. The screen is also designed with user comfort in mind, incorporating anti-glare technology that minimizes eye strain during prolonged use.

In terms of connectivity, the Intec STC SR00180SE does not disappoint. It includes multiple USB ports, HDMI output, and wireless capabilities, making it compatible with a wide array of external devices, from printers to additional monitors. This level of connectivity ensures that users can easily expand their workspace or share content seamlessly.

The design of the SR00180SE is both sleek and practical. Its lightweight construction makes it easy to transport, while its durable materials ensure longevity and resilience against daily wear and tear. Additionally, the ergonomic keyboard provides a comfortable typing experience, enhancing productivity during extended use.

Security is another key focus for the Intec STC SR00180SE. It features advanced security options, such as biometric authentication, ensuring that user data remains protected at all times. This emphasis on security is essential for business professionals and anyone concerned about data privacy.

In summary, the Intec STC SR00180SE is an exceptional device that merges performance, design, and security. Its powerful processing capabilities, impressive display, versatile connectivity, and robust design make it suitable for various applications. This device is built to cater to the diverse and evolving needs of today’s users, establishing itself as a leader in its category.