Gas connection, Hook fastening diagram, Front

			555 mm

55	mm			mm
	mm	475

Hook fastening diagram

Hooking position	Hooking position
for top H=30 mm	for top H=40 mm

Front

Hooking position	Back
for top H=20 mm

!Use the hooks contained in the “accessory pack”

•Where the hob is not installed over a built-in oven, a wooden panel must be installed as insulation. This must be placed at a minimum distance of 20 mm from the lower part of the hob.

Ventilation

To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).

.	45	mm	.
mm		mm	.
560

Where a hob is installed above an oven without a

forced ventilation cooling system, adequateGB ventilation must be provided inside the cabinet by

means of air holes through which air can pass (see figure).

Gas connection

The appliance should be connected to the main gas supply or to a gas cylinder in compliance with current national regulations. Before carrying out the connection, make sure the cooker is compatible with the gas supply you wish to use. If this is not the case, follow the instructions indicated in the paragraph “Adapting to different types of gas.” When using liquid gas from a cylinder, install a pressure regulator which complies with current national regulations.

!Check that the pressure of the gas supply is consistent with the values indicated in Table 1 (“Burner and nozzle specifications”). This will ensure the safe operation and longevity of your appliance while maintaining efficient energy consumption.

Connection with a rigid pipe (copper or steel)

!Connection to the gas system must be carried out in such a way as not to place any strain of any kind on the appliance. There is an adjustable L-shaped pipe fitting on the appliance supply ramp and this is fitted with a seal in order to prevent leaks. The seal must always be replaced after rotating the pipe fitting (seal provided with appliance). The gas supply pipe fitting is a threaded 1/2 gas cylindrical male attachment.

Connecting a flexible jointless stainless steel pipe to a threaded attachment

The gas supply pipe fitting is a threaded 1/2 gas cylindrical male attachment.

These pipes must be installed so that they are never longer than 2000 mm when fully extended. Once connection has been carried out, make sure that the flexible metal pipe does not touch any moving parts and is not compressed.

!Only use pipes and seals that comply with current national regulations.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

GF640W, GF640X, GF641X, KSG641X, GF641 specifications

The Hotpoint GF641 and GF640 are modern gas cookers designed to cater to the needs of today’s busy kitchens, combining efficiency with user-friendly features. These models embody Hotpoint's commitment to quality and innovation, ensuring that users experience both convenience and culinary excellence in their cooking endeavors.

One of the standout features of the Hotpoint GF641 is its four gas burners, which come in varying sizes to accommodate different cooking tasks. This allows for versatile meal preparation, whether simmering, boiling, or frying. The burners are designed with high-efficiency technology, ensuring optimal heat distribution for consistently excellent results. With precise temperature control, users can cook with confidence, knowing that their dishes will be prepared to perfection.

The GF640 offers similar advantages, featuring a robust stainless steel hob that not only enhances the aesthetic appeal of any kitchen but also provides durability and ease of cleaning. The clean lines and sleek design make it a great addition to both contemporary and traditional interiors, while the removable burner caps enhance maintenance efficiency.

Both models are equipped with an integrated grill, allowing for a range of cooking options from roasting meats to melting cheese on top of dishes. The grill's adjustable height ensures that users can achieve the perfect finish on their meals, making it ideal for both quick snacks and elaborate dinners.

Safety is a priority in the design of the GF641 and GF640. They come with flame failure devices that automatically cut off the gas supply if a flame goes out, providing peace of mind during cooking. Additionally, the ovens in both models feature an easy-to-read gas oven thermometer, enabling precise cooking and baking outcomes.

The functionality of the Hotpoint GF641 and GF640 is further enhanced by their energy-efficient ratings, helping users save on energy bills while reducing their environmental footprint. With user-friendly ignition, these cookers ensure a hassle-free start to every cooking session.

In conclusion, the Hotpoint GF641 and GF640 offer an impressive combination of features, technologies, and characteristics that make them an excellent choice for anyone looking to upgrade their kitchen appliances. Their thoughtful design, safety features, and versatile cooking options provide an ideal platform for culinary creativity. Whether you are a novice cook or an experienced chef, these cookers promise to deliver reliable performance and exceptional results every time.