Hotpoint G750 Electrical Connection, Connecting the supply cable to the mains, Electricity supply

Page 6

Electrical Connection

 

! THIS APPLIANCE MUST BE EARTHED.

GB

The hob is designed to work with alternating current,

 

the supply voltage and frequency indicated on the

 

 

rating plate (situated under the hob). Make sure that

 

the local supply voltage corresponds to the voltage

 

indicated on the rating plate.

 

Connecting the supply cable to the mains

 

electricity supply

For models supplied without a plug, fit a standard plug suitable for the load indicated on the rating plate, onto a cable and connect to a suitable socket. To connect direct to the mains supply, a double pole switch with a contact separation of at least 3mm suitable for the load and complying with current standards and regulations must be fitted between the appliance and the mains supply outlet.

The green-yellow earth wire must not be interrupted by the switch.

The supply cable must be positioned so that no part of it reaches a temperature of 50°C above room temperature. For installation above a built-under oven, the hob and the oven must be connected separately to the electricity supply, both for safetly reasons and for easy removal of the oven for repair, maintenance etc.

DO NOT use adapters as they could cause overheating or burning.

Before connecting to the power supply, make sure that:

the limiter switch and the domestic system can withstand the load from the appliance (see rating plate).

the supply system is efficiently earthed according to standards and laws in force.

the socket or double-pole switch are easily accessible when the appliance is installed.

!The wires in the mains lead are coloured in accordance with the following code:

Green & Yellow

- Earth

Blue

- Neutral

Brown

- Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Connect the Green & Yellow wire to terminal marked

“E” or or coloured Green or Green & Yellow. Connect the Brown wire to the terminal marked “L” or coloured Red or Brown.

Connect the Blue wire to the terminal marked “N” or coloured Black or Blue.

FAILURE TO OBSERVE THE ACCIDENT-PREVENTION REGULATIONS RELIEVES THE MANUFACTURER OF ALL LIABILITY.

Replacing the cable

Use a rubber cable of the type H05RR-F with a suitable cross section 3 x 0.75 mm².

The yellow-green earth wire must be 2-3 cm longer than the other wires.

6

Image 6
Contents Operating Instructions HOBInstallation PositioningFitting the appliance Gas connection Once this procedure is finished, replace the old rating Replacing the nozzles on separate double flame burnersBurner and nozzle specifications Electricity supply Connecting the supply cable to the mainsElectrical Connection Replacing the cableDescription of the appliance Overall viewPractical advice on using the burners Start-up and usePractical Advice on Using the Half Fish-Kettle Burner Fig. aDisposal Precautions and tipsGeneral safety Recycling & Disposal InformationCleaning the appliance Maintenance and careSwitching the appliance off Gas tap maintenanceTroubleshooting ProblemPossible causes/Solution After Sales Service GBGuarantee Page Xerox Fabriano
Related manuals
Manual 16 pages 59.34 Kb

G760, G750 specifications

Hotpoint has long been a trusted name in home appliances, and among its expansive lineup, the Hotpoint G750 and G760 stand out as two exceptional models in the category of washing machines. These appliances are designed for convenience, efficiency, and versatility, making them ideal choices for households seeking dependable laundry solutions.

The Hotpoint G750 and G760 feature advanced washing technologies that set them apart from competitors. One of the most notable aspects is the Energy Efficiency Rating, which highlights their ability to deliver superior cleaning results while minimizing energy consumption. This not only helps consumers save on utility bills but also reduces their carbon footprint, aligning with contemporary eco-friendly practices.

Both models are equipped with a variety of washing programs designed to cater to different fabric types and laundry needs. The gentle cycle is perfect for delicate items, while the heavy-duty cycle handles tougher stains with ease. The G750 and G760 also offer quick wash options, allowing users to reduce washing times for lightly soiled laundry, which is a significant convenience for busy lifestyles.

In terms of capacity, these washing machines provide ample space for large loads, accommodating families and individuals alike. The spacious drum design promotes optimal washing performance by allowing clothes to move freely, ensuring thorough cleaning without compromising on fabric care.

Moreover, the Hotpoint G750 and G760 incorporate innovative technologies such as the Anti-Stain system, which is engineered to tackle various stains without pre-treating. This feature utilizes a combination of specific drum movements and water temperature management to effectively combat stubborn marks while preserving the integrity of fabrics.

In addition to their performance features, these models boast a sleek and modern design, making them not only functional but also aesthetically pleasing. The intuitive control panel simplifies operation, providing users with easy access to select their desired settings without confusion.

Noise reduction technology is another characteristic worth noting. Both the G750 and G760 are designed to operate quietly, making them suitable for open living spaces or homes where noise may be an issue.

In summary, the Hotpoint G750 and G760 washing machines combine modern design with advanced technologies and thoughtful features aimed at enhancing the user experience. With their energy-efficient performance, versatile washing programs, and attention to stain removal, these models represent a smart investment for any household looking to streamline their laundry routine.