Operating Tips, Storing the Air Mover, Troubleshooting

2.0 Operating Tips

• For indoor use only.

• Adjust the Air Mover to the desired position for operation by tipping the machine onto one of the three flat faces of the heavy duty plastic chassis. The balanced machine design assures stable positioning.

• Plug the power cord into a grounded outlet.

• This Air Mover has three (3) power settings controlled at the side of the machine. Turn the power knob on the side of the Air Mover to the desired speed.

• 1 = 780 RPM. 2 = 1000 RPM. 3 = 1100 RPM. To turn the Air Mover off, turn the power knob to the off position.

• Never pull on the cord to disconnect or turn off the motor.

Dry Floors and	Move Musty Air	Dry
Carpets	Dry Walls and Curtains	Ceilings

1.1 Air Mover will not run

This Air Mover operates on a 15 amp nominal 115V, 60 Hz, A.C. power circuit. The, amp, hertz and voltage ratings are listed on the motor spec label found on each Air Mover. Using voltages above or below those indicated on the spec label will damage the motor. Always check your local voltage requirements.

1.2 Grounding Instruction This Air Mover must be grounded while in use to protect the operator from electric shock. This machine is built with a 3-wire cord and a 3-prong grounding-type plug (Figure 1) to fit a properly grounded receptacle.

Before using this machine, make sure a properly
grounded, 3-hole electrical outlet is available.	Figure 1
If not available, as in some older facilities, use	Figure 1
an adapter for connecting a 3-prong plug to
a 2-prong receptacle (Figure 2) to ground the

3.0 Storing the Air Mover

• Wind the cord around the carrying handle.

• Store in the upright position in a dry area.

• Check and clean after each operation. Remove soil and chemical buildup. Use vacuum and soft brush to remove soils from motor vents and fan blades.

• Wipe the outside chassis with a mild cleaner. Never wash the outside of the Air Mover with flowing water. Make sure that the air intakes are not blocked.

• Check switches for proper operation. Call a trained electrician to repair or replace damaged cords and plugs.

• Report problems and repair promptly.

4.0 Troubleshooting

Never operate this Air Mover when the equipment is not performing as expected or when any part is visibly damaged. When repair is needed, take the equipment to an authorized service center.

4.1 Air Mover will not run

•Circuit breaker tripped in building. Check and reset.

•Equipment unplugged. Check plug at wall and plug in.

•Power cord failure. Seek authorized repair services.

•Motor sparks or smokes. Seek authorized repair services.

4.2 High Vibration

•Air Mover fan blades are damaged or broken. Seek authorized repair services.

•Motor bearings are worn. Unplug the Air Mover and spin the fan blades. If the spinning causes noise or restricted movement, replace the Air Mover with new equipment.

outlet chassis.
IMPORTANT!! This adaptor may not be
used in Canada.
IMPORTANT!! Never cut off the grounding
prong for use in a 2-prong outlet. By doing
so, you have cut off your protection from
electrical shock.
Never assume that all 3-hole outlets are properly	Figure 2
grounded. Check before use.
Never assume that an adaptor connection (as in
Figure 2) is properly grounded. Check the outlet
with a ground fault interrupter device which
quickly indicated if a ground is connected.
Correct a faulty grounding before proceeding.

1.3 Extension Cords are Not Recommended

The Air Mover is built with a 25 foot safety cord. Use of any extension cords is NEVER

RECOMMENDED.

(6) Air Mover

Air Mover (3)

Fan specifications

Hoover, a name synonymous with household cleaning, has been a leader in the vacuum cleaner industry since its inception in the early 20th century. Among its popular offerings, Hoover's lineup of fans stands out for its innovative features and reliable performance. These fans are designed to enhance comfort and air circulation in any space, making them essential appliances for both residential and commercial use.

One of the main features of Hoover fans is their impressive airflow capacity. Equipped with powerful motors, these fans produce high CFM (cubic feet per minute) ratings, allowing them to effectively circulate air in larger rooms. Depending on the model, customers can find options that cater to various sizes and layouts, ensuring an ideal fit for any environment.

Hoover fans are designed with versatility in mind. Many models come with adjustable speeds, allowing users to customize airflow according to their preferences or changing room conditions. This adaptability is further enhanced by oscillation features, which enable the fan to distribute air evenly across a wider area, creating a refreshing breeze without the noise or discomfort of a single-direction airflow.

Energy efficiency is another hallmark of Hoover’s fan technology. Many models are engineered to consume less energy while delivering optimal performance, making them an eco-friendly choice for consumers who are conscious of their carbon footprint. This is not just beneficial for the environment, but also for lowering energy bills, as Hoover fans are built to provide effective cooling or ventilation with minimal electricity consumption.

Additional characteristics include user-friendly controls and safety features. Many Hoover fans come with remote controls for convenient operation from a distance, as well as programmable timers that allow users to set the fan to operate for a specific period. Furthermore, safety measures such as protective grilles and stable bases ensure that these fans can be used safely around children and pets.

A sleek, modern design is also a distinguishing feature of Hoover fans. Their stylish aesthetics can seamlessly blend into any decor, enhancing the overall appearance of spaces instead of clashing with it. With a commitment to quality, durability, and customer satisfaction, Hoover fans remain a dependable choice for those seeking efficient and aesthetically pleasing airflow solutions.